Alot of smoke.....

Turbo and Supercharger discussion
 Reply
User avatar

Alot of smoke.....

By JlaudioEGFreak
- Fri Nov 07, 2008 3:37 pm #77641 So i just installed my turbo kit on my d16z6 the thing is awesome and drives awesome except i cant get the idle to go under 2 grand and even at idle and especially when i drive i get a alot of smoke coming from the exhaust like a darkish white smoke it almost smells like a coolant oil mix.. any clue what this could be or what i should check. im lost......
User avatar

By JlaudioEGFreak
- Fri Nov 07, 2008 4:05 pm #77651 yes its definetly bouncy i will have to check my vacuum lines. I have the water line hooked up i bought the turbo used. The only thing i think is that maybe one of the oil seals in the turbo is bad but i got no clue. But i bought the turbo under the impression that it was rebuilt considering that what he told me and there was no shaft play on the turbo what so ever.
User avatar

By JlaudioEGFreak
- Fri Nov 07, 2008 5:39 pm #77682 I thought he was my friend but if the turbo has a bad seal and he knew about it idk anymore people are dumb.
User avatar

By JlaudioEGFreak
- Fri Nov 07, 2008 5:40 pm #77683 Thanks for the help when i get outta work today i will have time to take a look under the hood.
User avatar

By JlaudioEGFreak
- Fri Nov 07, 2008 6:09 pm #77692 If my turbo does have a bad seal where can i get something like that fixed?
User avatar

By Blk95coupe
- Fri Nov 07, 2008 7:18 pm #77710 Your local performance shop can rebuild your turbo if its still good it might not be :?
User avatar

By lopez286
- Wed Nov 12, 2008 11:54 pm #78409 if you got mechanich skills and the right tools you can rebuilt it your self u can search ebay they sell lots of turbo rebuilt kits depending on what u have or call the company direct and skip the middle men save some money. 8)
User avatar

By flyinryan122
- Thu Nov 13, 2008 12:51 am #78415 What are you using for engine managment?

Mine does they bouncy idle, but that is because i downloaded a base map from a website and buned it to a chip, well whoever made the base map played with the IAC controls, so at idle it surges. If you had access to a computer and know what you are doing, you could down load chrome (free) and fix the idle.

Did you use an oil restrictor on the feed line to the turbo?

If not it may be pushing too much oil through there, and pushing it passed the oil seals in the turbo right into the exhaust where it will burn and create tons of smoke. Also, using an oil such as Valvoline vr1 20W50 will cut down on smoke. Thicker oil makes it harder to push past the oil seals.
User avatar

By JlaudioEGFreak
- Fri Nov 14, 2008 3:14 pm #78613 yeah so i have gone through alot to find out what the problem was. i swapped out the turbo and it was still doing it so i pulled my motor and found out the pistons seals in cylinders 1 and 3. So i have the motor out i just have to wait until i get the money to buy a new motor but i want to keep it real simple besides getting a replacement d16z6 is there any other motor that will bolt right in and plug and play so i can keep this simple i just want it to get me through the winter and then im going to do a b series next spring.
User avatar

By flyinryan122
- Fri Nov 14, 2008 11:31 pm #78683 any obd1 d series will be a direct swap. a b-series isn't really any more work. if you want to save some money, i rebuilt my d15 last summer for under $100. just bought NPR piston ring set, acl bearing kit, new head gasket, a cylinder hone tool, misc. gaskets, and some feeler gauge. just buy like a chilton manual for your car and follow what it says in the engine over haul section. You'll learn alot by doing it your self, and to me, doing it your self is the best way to learn. if you make a mistake, you learn from that mistake. good luck with the car.
User avatar

By JlaudioEGFreak
- Mon Nov 17, 2008 5:34 pm #79116 Thanks man I think im gonna rebuild it seems to be my best option
 Reply
Return to Boost