Camber issues D:

Springs, Struts, Swaybars, Bushings, Tower Braces & more
 Reply

Camber issues D:

By Yahya
- Sun Oct 12, 2008 6:20 pm #73966 Recently installed Tein SS dampers, blox LCA's and an ASR brace.

Everything worked fine for like 2 weeks, but then i noticed that my steering is "cocky" when i turn. Feels like the steering has steps that it needs to follow. and my front left wheel has more camber than the right wheel and i dont have camber kits :P the car is'nt slammed either. Anyone with a hunch?
User avatar

By Gorveatt
- Sun Oct 12, 2008 6:37 pm #73969
teal_dx wrote:did something come loose? Check all the bolts & nuts asap!


Agreed...

By Yahya
- Sun Oct 12, 2008 11:42 pm #74002 Will do :D
If I want to be a suspension whore...
What should my next move be? except new rims and tires :P

The bushing between the upper control arm and the arm that goes to the LCA in the front?(the one you adjust camber with if you have a camber kit)

If i knew the name on every part in the wheel well, I would have bought new ones and replaced it :P
User avatar

By Greasedmonkey
- Mon Oct 13, 2008 4:01 am #74057 Are you talking about the upper ball joint?

If you want to be a suspension whore, you need to study the theories and crap for suspensions.
User avatar

By Grat
- Mon Oct 13, 2008 4:28 am #74063 ^^^^x2 lol

i would make sure everything is tight that u loosend to put those parts on that u stated above. then i would check your front ball joints since u are saying u have more camber in the front

u probably might need alignment..from what it sounds like

By Yahya
- Sat Oct 18, 2008 11:06 pm #74937 Found out what was wrong :D Lower ball joint on right is totally fucked, and all the other ball joints is soon to be.

Poly ball joints, is this recommendable if i still want to keep some driving comfort?

By sdots
- Sat Oct 18, 2008 11:52 pm #74947 I have a camber issue also, a friend of mine did too, so we changed all the wishbones and bushes and all was good again, bushes and metals were fucked that's why we replaced the metals also

By Yahya
- Sun Oct 19, 2008 12:08 am #74950 Btw, tips on where to buy stuff?
I'm tired of ebay :(

By sdots
- Sun Oct 19, 2008 7:07 pm #75051
Yahya wrote:Btw, tips on where to buy stuff?
I'm tired of ebay :(


if your in the states, Rock Auto. I'm in the U.K and found them useful even though import fees are a bitch :x
 Reply
Return to EG Chassis Suspension