Civic-EG.com Forum 3.3.1

- Sun Feb 03, 2008 7:48 pm #40702 Even though I don't have an eg, I joined this site because I know this sites admin. Brian is a good guy . Plus my one buddy just got a 93 si hatch and he currently doesn't have the internet. So I am just trying to help him out.

I've been around honda's/acura's for about 10 years now. I have a decent amount of knowledge on them. So hopefully I can help some members here.

I currently have 3 cars as of right now. I own a 1993 rhd integra with a swapped k20a2. Its nice to be behind a k-series . Then I have 2 cb7's (90-93 accord).

About to trade one of my accords (shown below) for a 1997 civic lx.


Just want a more reliable dd because my current dd is a 1991 accord with 219k and its starting to become a pain in the ass to keep up with everything on the car.

Just thought I would give everyone some info on myself even though I don't have an eg.

- Sun Feb 03, 2008 8:00 pm #40703 Make sure you keep us updated with pics and info on the K20 teg

[Apexracing]

- Sun Feb 03, 2008 11:10 pm #40736 yeah and some pics would be nice too. my bro has a 93 teg i think its a gs any ways he has alot done to it, too bad he wont decide on a color to get it painted hahahaha.

- Sun Feb 03, 2008 11:44 pm #40743 WELCOME!!

Craig

*looks at hand* so what do you want to do baby

[teal_dx]

- Mon Feb 04, 2008 3:56 am #40772 Hey Doug- welcome to the site!

For those who don't know - he has the sickest DA Teg I've ever seen:

[img]http://www.6thgearadvertising.com/pics/tank_integra/DSCN2302.jpg
[/img]
[img]http://www.6thgearadvertising.com/pics/tank_integra/DSCN2308.jpg
[/img]
[img]http://www.6thgearadvertising.com/pics/tank_integra/DSCN2311.jpg
[/img]

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Feb 04, 2008 4:22 am #40774

- Mon Feb 04, 2008 5:57 pm #40829 Thanks guys!

I have more pictures of my da in the garage.

Here are somethings that I just received for the da:
-jdm passengers side kick panel with the holder for a flare (just need to get a jdm flare now),
-some jdm power folding mirrors (just need painted)
-some dc5 side skirts that are modded for a da (just needs to be painted)

Having one of my buddies brothers make me a traction bar and I want to get the da tuned sometime before summer.

[teal_dx]

- Mon Feb 04, 2008 6:10 pm #40831 where are you taking it to get tuned? I'll be having mine tuned around that time too.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Feb 04, 2008 6:49 pm #40837 what's the gauge for in the left corner of the firewall?

[Apexracing]

- Mon Feb 04, 2008 7:16 pm #40839 i think its a fuel or oil pressure gauge, or maybe air fuel ratio?

- Mon Feb 04, 2008 10:37 pm #40865 That DA is the hotness. It would be even hotter if it was an EG. (seriosly though)

Miss my Milano Red EJ1 and my Captiva Blue Pearl EH2, RIP

- Mon Feb 04, 2008 11:25 pm #40877 Seriously, it's so mint that it's not even funny

- Tue Feb 05, 2008 1:58 am #40893

Seriously, it's so mint that it's not even funny

Thanks man!

Thats actually a volt meter. Its wasn't hooked up when I got it, but thats on my list to do.

Brian, I dunno where I'll be going to get her tuned. Just been looking around. Where are you going to get your hatch tuned? What program are you gonna be using to tune it?

[teal_dx]

- Tue Feb 05, 2008 2:06 am #40896 Well, people tell me there's a guy named Blunder (sp?) in Cinci that is the best around. That's a haul to trailer a car though. I'm thinking Slow Motion Motorsports in Columbus is the furthest I want to go. I have Crome and there's a couple people in Cleveland that are good with Crome. There's a dyno shop in Medina that Leidy's bro Mike works at sometimes, Backstreet Performance. So I might pay a good tuner to meet me there, not sure on a plan yet, I still have some searching to do. What are you running?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Tue Feb 05, 2008 2:42 am #40902 I am using Hondata's K-Pro. Most certified K-Pro shops are charging around $600 for just one calibration. But I don't have anything done internally as of yet. I might just wait til I do some internal mods til I go to a certified K-Pro shop.

Does Mikey get a discount at all? Do you know anyone that is good at tuning in crome and k-pro? If so, I'll go in with ya.

I've heard a mix of things about Slow Motions. I've heard that they've messed up some cars, but on the other hand, I've heard that they've done some good work.

Keep me posted if you find out about anything!

I'll keep looking around to find out if there are any good tuners around my area/cleveland area. If I find out anything, I'll hit ya up.