Civic-EG.com Forum 3.3.1

- Sun Jan 04, 2015 10:21 pm #350716 Just as the title says it is a nightmare of rust under there

- Sun Jan 04, 2015 10:27 pm #350717 inner wheel wells?

lets see some pics

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

[teal_dx]

- Mon Jan 05, 2015 2:29 pm #350733 They do not sell rear replacements that I have ever seen. Luckily, it is out of sight so the pieces you fabricate don't have to look beautiful.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Jan 05, 2015 11:28 pm #350759 Exactly what Brian said. I used motorcycle fenders made for a 300mm rear tire and cut them in half and used the pieces that fit the best. After I truck bed lined the wheel wells all the weirdness went away.

- Wed Jan 14, 2015 9:32 pm #351061 Assuming you have a hatchback Honda has discontinued the replacement rear wheel wells. If you aren't comfortable with fabrication and can find a shell that has them in good condition you can always drill the spot welds out and use the good panels to replace your rusted ones. If you need to look up the diagram of what the part looks like here are the OEM part numbers.

Left Rear Wheelhouse : 64730-SR3-300ZZ
Right Rear Wheelhouse : 64330-SR3-300ZZ

Hope that helps you out. Rust repair is a pain but if you do it right it will last a really long time.

Reviving Classic, Crafting Culture.
Classic Honda apparel, prints, and digital downloads.
Instagram:
https://instagram.com/enjoymotorsports
Website:
https://enjoymotorsports.com