- Tue Dec 02, 2014 1:49 pm
#350160
So my temp gauge does not work. When I turn the accessories on with the key the gauge goes up bout 1/4 inch or so I assume that's just showing it's getting power. But after that no matter how long I drive it it stays there then when I turn it off it drops back down and every time I turn the key it will go to that same position. I was thinking coolant temp sensor under distributor, is there a way to test it? Or is it possible some one completely took out the thermostat? Any tips will help thanks
Are you getting hot air when you turn the heat on?
I'd look closely at the connection of the wire on the temp sensor.
If that's good, then here is how to troubleshoot to determine if it is the sensor or the gauge:
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage