- Sun Apr 27, 2014 5:24 pm
#345090
Hello forum, this weekend i replaced my s9b lsd gearbox for a s80 lsd gearbox on my b16a2, also put a lightened flywheel in as well. When changing these i accidentally burst a hose and coolant leaked onto the connections of the speedo sensor that bolts onto the top of the gearbox. I didn't know this until i drove for several miles. The speedo didn't work to begin with then it starting coming and going. I thought leaving the connections to dry would eventually fix it but now it doesn't work at all. Another thing i noticed is that vtec seemed to only work when the speedo was working. Something to note is that i took the sensor for the speedo out of the s9b box and put it into the s80 so i don't know if this could be responsible for these problems. If anyone could give me advice or point me in the right direction it would be greatly appreciated.
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage