- Thu Nov 29, 2012 2:08 pm
#321156
Ok I think you will need to use the z6 bolts and then 2 d15b7 bolts in the back corner holes of the head. I don't know for sure because I used a y8 head.
If you already have both d15b7 and z6 bolts, then you can try them both and see which fits.
Since you have the z6 head, I would use the z6 intake manifold.
If you already have both d15b7 and z6 bolts, then you can try them both and see which fits.
Since you have the z6 head, I would use the z6 intake manifold.
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage