Civic-EG.com Forum 3.3.1

- Fri Jan 29, 2010 5:36 am #171854 i just change my wheels from 17 inch rims to stockys and my wheels looks like its bent in and i wanted to know if i should worry about this ?? please help =]

- Fri Jan 29, 2010 6:14 am #171858 did you get an alignment after you switched back? if not, thats most likely your problem.

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!

- Fri Jan 29, 2010 7:08 am #171863

did you get an alignment after you switched back? if not, thats most likely your problem.

naah i havnt but my mates says it could be camberd or seomthing like that ?

- Fri Jan 29, 2010 7:46 am #171865 does the top tilt in towards the engine. if so thats camber........ ROCK IT

single slammer = one cam of fury.


si = supercharger inside

- Fri Jan 29, 2010 7:53 am #171867

does the top tilt in towards the engine. if so thats camber........ ROCK IT

LOl yeh it is. should i fix it if so how ?? would it break my axle or anything ??

[teal_dx]

- Fri Jan 29, 2010 2:07 pm #171883 Can you post some pics?

Some negative camber is acceptable. It is toe out that chews up the inside of your tires.
Best bet is to get to an alinement shop

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Jan 29, 2010 5:09 pm #171901

Can you post some pics?

Some negative camber is acceptable. It is toe out that chews up the inside of your tires.
Best bet is to get to an alinement shop

haha oh okas thanks heaps =]