Flyinryan122's +600HP SOHC. *Updates/pics.

Post YOUR Hatchback here
 Reply
User avatar

By flyinryan122
- Fri Oct 02, 2009 11:18 pm #148694 Got some more pics,

New wheels.

Image
Image

Also got new suspension. Traded out my Skunk2 Pro-s coil overs for a brand new set of Omni Power drag launch coil overs(18k rears, 14kFronts)
Image

Then this is my new gauge pod ( oil temp gauge is sitting there for show and will be replaced by my wideband.) The switch in the middle is for the boost soleniod to switch between high and low boost.

Image
Image


I'm finishing up my fuel system tonight, i welded a fitting to the top of the fuel pump sending unit so i can run stainless braided line from the walbro 255 intank, to a bosch 044 inline pump, and then run from there to the fuel rail via -8AN line. I'll snap some pics and pot them asap.
User avatar

By flyinryan122
- Fri Oct 02, 2009 11:33 pm #148696 Going to break the 600hp mark.

I work for a fab/car shop called Element Racing, I'm building my own top mount mani, And right now i'm getting ready to order my turbo. It's a Forced performance gt3586r. (HTA gt3586r) They swap out for a billet 61mm wheel, swap out for a different compressor housing with anti-surge. DSM guys are making over 800hp on this turbo, when it should only make around 600, and they see 20psi around 4000rpms. I can't wait!
User avatar

By Mr. Pink
- Sat Oct 03, 2009 12:44 am #148703 this is definatly a nice build, i am looking forward to more of it.
User avatar

By flyinryan122
- Sat Oct 03, 2009 12:44 am #148704
alldatJUICE wrote:^^ :shock:


:lol: Stay tuned. Should be done within the next few months!
User avatar

By mistergou
- Sat Oct 03, 2009 8:00 pm #148751 looks good :thumb:
User avatar

By flyinryan122
- Sat Jan 30, 2010 5:20 am #172058 Sup dooodes. Adding some info. Got some new parts, i'll get pics up ASAP. The shop i work for is sponsoring me a turbo until i can afford theone i'd really like. So the one i will be using for now is a Garrett t67, t3 twin scroll w/.86 hot side. I also just picked up a Precision 750hp Intercooler. and some Bosch 1000cc injectors. I also ordered an NGK AFX wideband, and Hondata s300. Next friday i will have my wastegates (2 Tial 38mm V-band) and Tial BOV ordered. in the mean time i will begin building my top mount turbo manifold. I'll get pics as i progress with that as well. :)
User avatar

By Dippin_EG
- Sat Jan 30, 2010 7:02 am #172073 *1 hour 42 minutes later*
HEY, got those pics yet? :lol:
User avatar

By DontHateonEG8
- Sat Jan 30, 2010 7:09 am #172079
flyinryan122 wrote:Sup dooodes. Adding some info. Got some new parts, i'll get pics up ASAP. The shop i work for is sponsoring me a turbo until i can afford theone i'd really like. So the one i will be using for now is a Garrett t67, t3 twin scroll w/.86 hot side. I also just picked up a Precision 750hp Intercooler. and some Bosch 1000cc injectors. I also ordered an NGK AFX wideband, and Hondata s300. Next friday i will have my wastegates (2 Tial 38mm V-band) and Tial BOV ordered. in the mean time i will begin building my top mount turbo manifold. I'll get pics as i progress with that as well. :)


:jawdrop: :jawdrop: :jawdrop:
give me pikturs!!!! :wink:
User avatar

By gostt
- Sat Jan 30, 2010 7:59 am #172116 Your car look awesome :D
User avatar

By flyinryan122
- Sat Jan 30, 2010 4:45 pm #172172
Dippin_EG wrote:*1 hour 42 minutes later*
HEY, got those pics yet? :lol:
Here's a few :)
Turbo- t67, t3 twin scroll.
Image

Fuel system-
-8 fitting welded to the top of the stock feed/fuel pump assembly
Image
(cover not done yet)
Image
Image

So with that set up, the intake 255 will feed fuel to the bosch 044 inline pump, and from there run to the fuel rail. All plumbed via -8 stainless braided line. Then fuel will pass through a GoldenEagle fuelrail, go through some bosch 1000cc inj. any un used fuel will travel via -6 braided line to an aeromotive a1000 FPR, then back to the tank.
User avatar

By flyinryan122
- Sat Jan 30, 2010 4:50 pm #172174 I'm on my way to the shop now, I'll take my camera with and get some better pics of the stuff i have there. and maybe a few of the work i do there :lol: then i'll come home and get some more
User avatar

By EgCruiser
- Sat Jan 30, 2010 10:53 pm #172246 wow . this Eg is soo freaking cool

:thumb:
 Reply
Return to Your Ride - Hatchback