Civic-EG.com Forum 3.3.1

- Wed Jul 29, 2009 4:06 am #133930 I was just taking a look at some cut and exposed wires in my bay and i found that all this wire was connected but wasnt going anywhere
so i disconnected it and my car still runs fine and everything works

it has two fuse holders, one of the fuses are blown and two power wires and one is cut

it came off the bottom screw


this is what came out


this is the part that was connected to the lower screw in the first link/pic
the two black things are the fuse holders

[teal_dx]

- Wed Jul 29, 2009 4:35 am #133933 maybe someone installed aftermarket fogs at one time & removed them

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Jul 29, 2009 4:16 pm #134028 looks like some wiring left from an aftermarket part. you dont need to worry about it. teal said could be fog lights from previous owner or neons or somthing.

- Wed Jul 29, 2009 5:44 pm #134042 well the guy i bought the car off of said the car was already wired for fogs
when i was taking a look at the wires they were all chopped up and werent really connect

- Wed Jul 29, 2009 7:33 pm #134080 Those are for aftermarket halo lights without a doubt. I sadly had some and this is exatly what the harness looked like. If you have stock lights the other half of the harness is probably gone.

Nothing to worry about

- Thu Jul 30, 2009 12:20 am #134152

Those are for aftermarket halo lights without a doubt. I sadly had some and this is exatly what the harness looked like. If you have stock lights the other half of the harness is probably gone.

Nothing to worry about

i have projector headlights in the car right now

- Thu Jul 30, 2009 1:30 pm #134220 I went a took a picture of mine, I had the one power wire and the other that gets lost in the harness somewhere???

I don't understand what you are talking about. Sorry, I'm being nosy

92 Vx Stockish

- Thu Jul 30, 2009 2:12 pm #134222 ^ nothing for you to worry about. He had aftermarket wiring.

- Fri Jul 31, 2009 4:35 am #134473

^ nothing for you to worry about. He had aftermarket wiring.

yea that pic is what mine looks like now