Civic-EG.com Forum 3.3.1

- Thu Jan 07, 2016 4:02 pm #358064 Run the engine code . What is the code ?

Drive it HARD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
viewtopic.php?t=28277

- Thu Jan 07, 2016 4:39 pm #358065 Not sure, it's obd1 and I don't know how to scan it

[teal_dx]

- Fri Jan 08, 2016 2:39 am #358066 Sorry for your loss... it had come such a long way.
Here's how to read the code:
viewtopic.php?t=1558

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Sat Jan 09, 2016 12:45 am #358080 Sucks about your hatch. You made a lot of progress on it. Nice find on the white hatch.

- Tue Feb 02, 2016 5:12 am #358347 What's up peeps, a few updates on the new eg "Casper" , previous owner had an alarm and it was all hacked together, so I ripped it out and now have to change the body harness because they spliced Into so many wires! Sucksbut I like my stuff clean. Putting my Motor from my old car back in it's a white CX and had the Blue interior but has a sunroof ( non-powered)

- Tue Feb 02, 2016 5:17 am #358348 Some red an clear tails

[teal_dx]

- Wed Feb 03, 2016 5:37 pm #358358 Looking better already!

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Dec 07, 2016 4:42 am #361052 Hey guys long time no talk! I'm back lol so I have a jdm b16a in my white eg


JDM b16A fully rebuilt
Supertech valvetrain (90lb springs)
Competition clutch
Skunk2 loss motion assembly(Not installed yet)
Aem fuel rail
Skunk2 cam cap seal
New oem cam seals
Cometic headgasket
Blue silicone rad and heater hoses
Arp headstuds
Gates racing timing belt
Injen intake
Yonaka half rad
New oem tensioner and water pump
Garage 16 fuel pressure gauge
Bwr fuel pressure regulator
Skunk2 intake manifold
ITR throttle body
All new oem seals


compression test was 185 across the board

BUT I'm leaking a little coolant at the front passenger side corner where head meets block.

- Wed Dec 07, 2016 4:11 pm #361058 Great time to replace the HG and start fresh.
Buy yourself the kit and drop it in.

Drive it HARD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
viewtopic.php?t=28277

- Thu Dec 08, 2016 12:27 am #361059 It's a new headgasket tho any idea why it's leaking? I heard mixed stories about Cometic gaskets. Could it be something else leaking coolant into that corner

[suspendedHatch]

- Thu Dec 08, 2016 3:17 am #361060 Who installed it? Did you machine the head and the block? Did you torque it in the proper sequence?

- Thu Dec 08, 2016 3:23 pm #361062

Who installed it? Did you machine the head and the block? Did you torque it in the proper sequence?

These are great questions. The best thing is to dive in and remove the head package and inspect the block surface.

Drive it HARD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
viewtopic.php?t=28277

- Fri Dec 09, 2016 6:24 am #361063 I had the motor ripped apart and fully rebuilt buy a very reputable shop called jdm addiction. The head was sent out for machining but don't think the block was. He said everything was goodThough, I'm losing coolant from the resivoir, I'm hoping maybe it's a rad hose or something leaking down into that spot but doubt it

- Fri Dec 09, 2016 12:57 pm #361064 If the shop is reputable at all they will stand by their work. dont mess with it before you take it to them.

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Tue Dec 13, 2016 3:29 am #361084 It's been like 2 years now... There's not much there going to say, not
Sure what to do, I might just do the headgasket and use an oem one, do the lma's at the same time..

Can you guys give me pointers for boost?? It's a budget build, most parts are eBay and the turbo will be aswell but getting a good tune!
So far I have the piping, eBay bov, wastegate with dump tube, intercooler, Manfold, , marroso oil pan, sandwhich plate with oil return line..


I know I need turbo and turbo feed line,injectors, downpipe, Aem wide bands and fuel gauge