ECU, Wiring, Sensors
By jdm_movement
#97160 Okay, I know that there are many threads of similar subjects but i couldnt put all three together. i need thses three things fixed. First are my fog lights

I ordered one of those cheap ones off ebay and my fog light switch has 4 different wires. One red, one blue, and two yellow wires . where do i hook up the blue and yellow wires.

Next are my jdm black housing head lights. I just changed them from the stock pair, and i dont know how to hook up the city lights and i dont know the right size bulb.

Lastly are my amber corners. I want my corner light to run while my head lights are on or when they are off. My last hatch, i had the ability to do this, as it came like this. As i've read, this was an "american civic". The corners had three wires. black red and green. the civic that i have now, the corners only come on when i turn my indicators on. it only has two wires. the black and the green.

It would make my day if any one could help me with either one of these!
User avatar
By BLaCkSiLo
#99389 well i ordered some of those same fog lights off of ebay myself, there is the 4 wires, the blue one (one with the in-line fuse) hooks straight to the battery, the red one hooks to the other wiring harness that comes out of the firewall (they have a male-female plug) and the two yellow wires go to your "activation" wire...i used the corner signal so i could have them on while my running lights were on....

hope this helps, and for the city lights.... hook them up to the same source as your turn-on lead for the fog lights, they draw low current so they should be fine.