Civic-EG.com Forum 3.3.1

- Thu Feb 12, 2009 9:08 pm #96043 I want to know if I can get just the rubber seal/molding around the rear driver side 1/4 glass, if so where? I have tryed looking around for them but no luck and come to find that they are glued to the glass VERY well.

Oh its on a 95 EX coupe, Thanks

- Thu Feb 12, 2009 9:14 pm #96046 Try Majestic Honda they have a a lot.

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Thu Feb 12, 2009 9:19 pm #96047 Nope you have to buy the glass with it, I need the seal only. But thank you

- Thu Feb 12, 2009 9:20 pm #96048 Oh really? Thats dumb. Probably your best bet is to find a used set then

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Sat Feb 14, 2009 1:57 pm #96409

Nope you have to buy the glass with it, I need the seal only. But thank you

Majestic has it available. They are $35.02 per side.

106505 010 1 MOLDING, R. QUARTER 50.03 35.02 Qty:
106506 011 1 MOLDING, L. QUARTER 50.03 35.02 Qty:

- Sun Feb 15, 2009 5:25 am #96536

Nope you have to buy the glass with it, I need the seal only. But thank you

Majestic has it available. They are $35.02 per side.

106505 010 1 MOLDING, R. QUARTER 50.03 35.02 Qty:
106506 011 1 MOLDING, L. QUARTER 50.03 35.02 Qty:

Do you think you could post the link for it because when I search for it on Majestic under 95 Civic Coupe... I can't find it whatsoever.

I guess the one you posted is for a 92 Accord. Not the same window at all.

Heatherly - 2000 Honda Civic SI - JDM B16A

- Sun Feb 15, 2009 5:29 am #96538 http://www.hondaautomotiveparts.com/aut ... RTER+GLASS

- Sun Feb 15, 2009 5:38 am #96546 Am I retarded or is there just not the seal that I need on there... I don't get it?? I have the window just need the rubber seal that the window fits into.

Heatherly - 2000 Honda Civic SI - JDM B16A

- Sun Feb 15, 2009 5:42 am #96549 It doesn't look like you can buy just the rubber seal, in that picture it looks like it comes as all one part. Did the window you got not have it on there?

- Sun Feb 15, 2009 5:44 am #96550 We took the window from a t-boned coupe and the seal got all effed so Adam took it off and now can't find a seal to save our lives. That's why I'm guessing IF they make it it'll be at the dealership. I'm bout ready to pull my hair out. A guy I know that does body work says he knows you can get the seal we just can't find it online.

Heatherly - 2000 Honda Civic SI - JDM B16A

- Sun Feb 15, 2009 5:47 am #96552 To save our lives!!! I just want to hear from someone that you can't get the seal by its self that would truely know before I go and spend 100 dollars on the glass and all but there hasn't been anyone.

- Sun Feb 15, 2009 5:56 am #96554 from all the parts places I've looked at it doesn't look like you can buy just that seal piece. I'm going to the junk yard tomorrow, so ill mess around with a car there