i'll compromise that with other stuff then
- Fri Feb 22, 2008 1:49 pm
#43443
Compromise? LOL, compare you dickwad
I replaced my EDM tail lights with USDM ones, but I used a pair of diodes to have USDM like lighting ánd still have my foglight; I removed the metal reflector from the bulb holder, and my brake light in the left-inner tail unit is also used as a fog light, so I don't have problem at the annual inspection... wich states; it is not mandatory to have a foglight since the car is a '95, but if you have a switch for it, it IS mandatory it works.
So when I hit the brakes, my rear foglight switch light will not light up, and when I turn the foglight on, only the designated bulb will burn... not all of my brake lights
And dude, you have a damn sweet EJ in your possession
I replaced my EDM tail lights with USDM ones, but I used a pair of diodes to have USDM like lighting ánd still have my foglight; I removed the metal reflector from the bulb holder, and my brake light in the left-inner tail unit is also used as a fog light, so I don't have problem at the annual inspection... wich states; it is not mandatory to have a foglight since the car is a '95, but if you have a switch for it, it IS mandatory it works.
So when I hit the brakes, my rear foglight switch light will not light up, and when I turn the foglight on, only the designated bulb will burn... not all of my brake lights
And dude, you have a damn sweet EJ in your possession
- Fri Feb 22, 2008 5:23 pm
#43460
That foglights had one hell of a trip
Glad you got it all working, surprising the amount of small differences between the UK and US ones
Glad you got it all working, surprising the amount of small differences between the UK and US ones
- Sat Feb 23, 2008 8:17 am
#43525
thanks again graham!
Here is a before pic with the T3 Super 60 and tight clearance..
Initially I thought.. oh crap, my GT2871R wont fit since it is a little bigger. I tested it out today in my garage on my dayoff and behold!
It fits! Now i dont need to buy a new manifold setup saving me $650 bucks. I find it strange that the GT2871R has better clearance than the T3....wtf?
Here is a before pic with the T3 Super 60 and tight clearance..
Initially I thought.. oh crap, my GT2871R wont fit since it is a little bigger. I tested it out today in my garage on my dayoff and behold!
It fits! Now i dont need to buy a new manifold setup saving me $650 bucks. I find it strange that the GT2871R has better clearance than the T3....wtf?
- Sat Feb 23, 2008 10:42 pm
#43574
I was actually planning to do this similar setup. except just have the inner taillights not light up.
hahahaha.
stefan wrote:Compromise? LOL, compare you dickwad
I replaced my EDM tail lights with USDM ones, but I used a pair of diodes to have USDM like lighting ánd still have my foglight; I removed the metal reflector from the bulb holder, and my brake light in the left-inner tail unit is also used as a fog light, so I don't have problem at the annual inspection... wich states; it is not mandatory to have a foglight since the car is a '95, but if you have a switch for it, it IS mandatory it works.
So when I hit the brakes, my rear foglight switch light will not light up, and when I turn the foglight on, only the designated bulb will burn... not all of my brake lights
And dude, you have a damn sweet EJ in your possession
I was actually planning to do this similar setup. except just have the inner taillights not light up.
SlipCivic wrote:I love your penis enlarger
hahahaha.
- Sun Feb 24, 2008 5:54 pm
#43631
where di you get a manifold like that anyway?
- Mon Feb 25, 2008 12:55 am
#43647
www.spoolinperformance.com
naw its not fully on yet. Waiting on coolant lines and i need to make a trip to ATP turbo to buy an oil restrictor for the GT28 so it won't meet the demise like my old T3. If nate isnt available, i will tune at redzone.
SlipCivic wrote:where di you get a manifold like that anyway?
www.spoolinperformance.com
EBT WeSt wrote:Good shyt Derek, did u bring it to Redzone already?? IF so what numbers it get?
naw its not fully on yet. Waiting on coolant lines and i need to make a trip to ATP turbo to buy an oil restrictor for the GT28 so it won't meet the demise like my old T3. If nate isnt available, i will tune at redzone.
- Mon Feb 25, 2008 2:19 pm
#43688
Thanks man, I love that one on your car.
LowTEC-Derbo wrote:SlipCivic wrote:where di you get a manifold like that anyway?
www.spoolinperformance.com
Thanks man, I love that one on your car.
- Mon Feb 25, 2008 3:22 pm
#43697
You know Nate is always busy...from what I hear he has a list of things that people want him to do 
LowTEC-Derbo wrote:EBT WeSt wrote:Good shyt Derek, did u bring it to Redzone already?? IF so what numbers it get?
naw its not fully on yet. Waiting on coolant lines and i need to make a trip to ATP turbo to buy an oil restrictor for the GT28 so it won't meet the demise like my old T3. If nate isnt available, i will tune at redzone.
You know Nate is always busy...from what I hear he has a list of things that people want him to do
East Bay Troops
- Wed Feb 27, 2008 9:01 pm
#43905
i went red interior lights since my white LEDs blew out.. lol
I painted my needles red........to match better.. How horrible. haha.
I painted my needles red........to match better.. How horrible. haha.