- Tue Sep 20, 2016 1:18 pm
#359748
Loaf31 wrote:Driv-it-hard wrote:Loaf31 wrote:Yeah I was planning on going with a Hub-centric one. I just want to make sure they'll clear the stock studs
Before mounting the wheels. Double check everything to make sure that the mounting surface of the wheel mounts flush to the spacer and not onto a nut.
Do you know if the OEM Lugs will stick out? I'd like to make sure they dont before buying the spacers
Loaf, The only person that would know that answer would be you. Have you changed the studs in the past if they have broken on you ? Have you replaced the studs with OEM or discount parts? You'll have the measure the lengths of the studs and see if the 15mm will be thick enough that the studs won't stick out. Or you will have the thread a nut on the stud and grind off the parts of the stud that will stick.
Drive it HARD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
viewtopic.php?t=28277