- Sun Jun 15, 2014 2:53 am#346456
Picked up some ls meshies that need a lot of work. I finished 2 of them but starting to regret getting them, hopefully they turn out ok, I'm painting then gold, also broke a peice of my socket trying to get head studs off, also grabbed a teggy dash today but so hard to install lol not sure how to wire things up an get cluster working
- Tue Jun 24, 2014 8:22 pm#346710
What's up guys, so I'm still having trouble finding the right size socket to take the arp head studs off lol and I'm also having a hard time taking the old intake manifold gasket off! Any ideas?! I want to get the head gasket done, im also going to order a gates timing belt,water pump and tensioner kit next week.. But I live in a building and the motor is on a tire lol the clutch is on and I can't get the pulley off. Please help!
I also re did the valve cover and grabbed some washers and spike bolts. I highly recommend the wrinkle paint!
- Wed Jun 25, 2014 4:09 pm#346739
Iv actually looked everywhere for that aircraft paint remover/cleaner but it's almost like they don't sell it here in Canada lol someone said carb cleaner and a razor blade should work so I'm gonna try that today
- Wed Jun 25, 2014 5:40 pm#346743
That paper gasket was a bitch to remove, A square block of wood and 60 grid sand paper, just hold the block straight and flat it out. About the studs, usual is 14mm standard, can you make a picture of that, it could be 14mm 12corners or 1/2 12corners,13mm 12corn...
cIvic eg4 ImpoRt D15b dUal carbs!
D16z6 conversion going on.
- Wed Jun 25, 2014 7:09 pm#346744
I can't really take a pic as the studs are in the head and I only have an iphone to take pics with lol the 1/2 12 point socket fit but I broke the extension peice because it's so small
An online community dedicated specifically to the 92-95 Honda Civic EG chassis (EJ too!). This site was created to house technical articles for our cars, without having to sort through unwanted information about other vehicles. September 30, 2006 was our first day live.