- Sat Feb 16, 2013 3:56 am
#326562
Well a few of my friends have been telling me to make a thread about the story of the car and what has been done up to this point and what my plans are. . . . so here it goes.
I will add pictures once I am free to upload my pictures. =)
A buddy (Bartender) I use to work with had this Black 93' EG Hatch for a few years in his family. One day he came to work in a brand spankin' new 2012 Chevy Camaro. Long story short, he for one is not mechanically inclined what-so-ever. He told me that he was driving down the street and the whole transmission just stopped working, he couldn't shift gears, push the clutch, . . . nothing.
He didn't feel like paying someone to fix a beater so he had it towed back to his garage and left it. I have wanted one of these things for a long time so I knew I was going to buy it from him. . . . but for how much. I spoke with him for about an hour and he decided that he didn't give a fuck about it so he wanted $50!!!!!!
I fucking grabbed my wallet and handed him that shit ASAP! Grabbed a UHAUL Transport and brought it to my garage. A little tinkering and research over the car and BAM! Runs like new.
Dumbass never kept up the brake fluid and ran out! I told him the next day and he was like wow, oh well. lol
So I picked up a decent looking EG with a little rust for $50. STOKED ON LIFE!
So now its my turn.
How it look when I brought her home:
I drove the car for maybe a week and the head gasket blew on me, my buddy never kept any maintenance on the car what so ever.
So I ordered a new head gasket from my friends at partsource. Love getting AT-COST! =) Fixed that shit in like 2 hours. Back on the road.
Maybe a month later the motor blew up, but thats what you get for a 415+K D15B7. Haha. Went to Pick-N-Pull and picked up another D15B7 for now.
I just had to buy more. went to Pick-N-Pull just to take a peek around, and happened to find myself a 94' Smashed Teggy with KYB Coilovers with Spoon Springs, and a Catback Apexi N1 Exhaust. $125 later I walked out. =)
Ordered myself some JDM LCA's, Front & Rear Adjustable Cambers.
Picked up a Type R Front Lip and Type R Rear Lip, Spoon Duckbill Spoiler, and Dual Halo 1-Piece TYC Headlights off of a fellow beyonder.
Picked up an 11" Rally Steering Wheel and Hub Adaptor, and a triple pillar gauge with 52mm Autometer Oil Temp, Water Temp and Volt Meter, Black and Red Stitch Shift Boot, Skunk 2 Dual Bend Short Throw, and a Carbon Fiber Shift Knob.
Bought a set of 17" Motegi Racing R7's to roll around in other then the steeliness.
Thought of a color scheme and went with Neon Green for the Lip Kit and Spoiler.
Drove it like that for awhile and didn't like how Big the 17" was, do I found a set of 15" Silver Core Racing Sevens, and instantly grabbed some handy-dandy Plasti-Dip and blacked them out with some green accents for the touch.
Was kind of pissing me off that the halos on the headlights would not work and the headlights were pretty beat up themselves, so guess what. . . . NEW SET! Also bought a Supernova H3 8000K HID Kit that came with some FREE Audi Style Driving Lights.
Mounted and Look Mean! =)
And I have been driving it like that for about a year now and feel that I want to do some extensive modding over the 2012-2013 Winter Season.
Picked myself up a sexy 6-Point Roll Cage off a fellow beyonder and painted it Neon Green to match! Picked up a 5 Panel Wink Mirror off a different beyonder.
Taking the entire interior out to change it from that ugly greyish interior and dye it all OEM Black. will look minty fresh.
UPDATE: Got all the interior Panels Painted Gloss OEM Black!
Hoping to do a complete Wire Tuck, Engine Shave, and plenty other things.
Picked up a set on De-Branded FRP Bucket Race Seats
Planning on ordering a set of new Pistons, Rings, Valves, Retainers, Springs, the whole damn works for the B.
And maybe. . just maybe if I come up with the funds, since my newly born baby girl Serenity takes up the wallet now. I may turbo the B.
But we will see.
Also picked up a SWEET Pair of D2S Morimoto Bi-Xenon Retrofit headlights from our good friend Mitch6. Thanks again.
Also picked up a JDM EG6 Projector Fog Light Kit for $20 locally in Calgary!
Currently ordering some rear quarter panels and going to tackle that next, ordering a block plug since I am deleting the rear wiper assembly. Ordering some smoked JDM Amber Corners and Stanley smoked Side Markers. Then I am going to Vinyl Wrap the whole car in High Gloss Black. I am not a big fan of the Matte like Mitch6's ride, but damn he did a good job. May call you soon buddy to give me a hand!. haha I also got started on the wire tuck.
But this is how she sits for now until my rear quarters come in, minus the headlights:
Debating on picking this up and fixing it, guy is selling it for $150. COMMENTS?
That is all for now, Will keep everyone updated on what happens and what else goes in. But in the Meantime, here is a List of everything I can think of.
Thanks for reading!
Give me some feedback and thought of what other things I could do.
Updated List As Of January 9th, 2015
Engine:
96 USDM GSR B18C
AEM Tru-Time Cam Gears
Integra Type R Valvesprings & Seals
3-Way Port & Polish
Gates Racing Timing Belt
NGK Heat Range 7 Spark Plugs
MSD Wires
Drop Engineering Motor Mounts
Drop Engineering Transmission Mount
Painted Valve Cover
Billet Aluminum Oil Filler Cap
K&N Valve Cover Breather Filter
Mobil 1 5W30 Full Synthetic Oil
Integra Type R DC2 Intake Manifold
AEM Black Series Fuel Rail
Hondata Intake Gasket
B&M Fuel Pressure Controller & Gauge
Hondata Metal Plate Head Gasket
Wiseco Low Compression 81mm 8.9:1 Pistons
ACL Race Bearings
Eagle Connecting Rods
Supertech Block Guard
Type R Crankshaft
Transmission:
Integra Type R DC2 LSD S80 Transmission
ACT Heavy Duty Pressure Plate
ACT Stage 2 Clutch
TCC-R Shortshifter
TCC-R Lightened Flywheel
Mobil 1 LSD Oil
Turbo Kit:
CT26 Toyota Supra Turbo
- CNC'd CT26 to T3 Adaptor Plate
- CNC'd Exhaust Outlet Flange
- 2.5" V-Band Flange & Clamp being welded on the turbo exhaust outlet
- Titanium Heat Blanket
- K&N Slim Air Filter
- 10AN Oil Drain Line & Fittings
- 4AN Oil Feed Line & Fittings
- 4AN Coolant Line & Fittings
FullRace T3 Top Mount Turbo Manifold
- Almost Brand New 2000km Used
Tial 38mm V-Band Wastegate & Custom Welded Dump Tube
- V-Band Clamps on both Wastegate & Dumptube Sides
- Current 7PSI Spring
- Additional 10 PSI Spring
2.5" EBay Downpipe
- Intend to weld V-Band Flange & Clamp to mount to Turbo
- Have to custom make to fit properly still.
Chipped P61 OBD1 ECU
- Chipped with a SST 27SF512 Re-Burnable Chip
- Currently with a P30 Basemap
- All Sensors Working
- Soldered in Zero Force Insertion (ZFI) Socket for easy chip removal
- All Main Capacitors Replaced
- All Professionally Done
BLITZ Super Sound BOV
- Has two outlet attachments, one filter and the other is open
- 2 Springs, One for soft and both for hard
- Brand New
- Missing Vacuum Line
EBay Intercooler
- Painted Flat Black
2.5" Charge Piping
- Professionally PowderCoated Black
Stage 1 Snow Performance Methanol Injection Kit
- Switched Solenoid to shut off
- Brand New In Box
440cc DSM Injectors
- Pigtails Included
52mm Prosport Evo Digital Boost Gauge
- With Sending Unit
Miscellaneous Parts
- VMS Mechanical Liquid Filled Fuel Pressure Gauge
- NGK 7 Heat Range Spark Plugs
- Oil Pressure Sending Adaptor for Oil Feed to Turbo
- 10ft of 4AN Stainless Steel Line
- 3ft of 10AN Stainless Steel Line
- Titanium Heat Wrap for Downpipe
- Weldable Bung for Oil Pan
- 2 Weldable Bungs for Downpipe, O2 and Wideband
Engine Bay:
Russel Black AN Inline Fuel Filter Kit
SS Braided Clutch Line (Master to Slave)
Black AN Power Steering Delete Loop Kit
To Order:S2000 Clutch Master Kit
Battery Relocation Kit
Fuse Box Relocation
Engine Harness Tuck
Headlight Harness Tuck
Shaved & Welded Engine Bay
Carbon Fibre Hood Struts
Body:
To Order:VIS Carbon Fibre Hood
To Order:BYS Carbon Fibre Front Lip
Retrofit D2S Morimoto Bixenon Headlights.
Phillips D2S 85122+ 4300K HID
JDM Fog Lights
H3 3000K HID
Blacked-Out Taillights (For Now)
To Order:BYS Carbon Fibre Spoiler
Front & Rear EGR Racing Tow Hooks
Brand New Rear Quarter Panels (Rust Delete)
Antenna Delete
Hood Pins
Wheels & Tires:
To Order: 16X8 Avid.1 AV-05 (BBS Reps)
To Order: Toyo Proxes R1R 185/45R16
To Order: BWR Open End Lug Nuts
To Order: ARP Extended Wheel Studs
Suspension:
Full 96 Spec Type R 4x114.3 Disk Conversion Kit
To Order: Function & Form Type 2 Coilovers (10kg Front & 8kg Rear)
Energy Suspensions PU Bushings Master Kit
Mugen Front Upper Strut Bar
Type R Rear Strut Bar
Type R C-Pillar Bar
GODSPEED Front Upper Control Arms
GODSPEED Rear LCA's
GODSPEED Rear Camber Kit
Aluminum Rear Subframe Brace
Aluminum Lower Tie Bar
24mm Progressive Rear Sway Bar
Exhaust:
Apexi N1 2.5" Catback
Cat Delete
Interior:
De-Branded FRP Bucket Race Seats
3 Pod A-Pillar Gauge Holder
ADD W1 52mm Digital Oil Pressure Gauge
ADD W1 52mm Digital Oil Temp Gauge
ADD W1 52mm Digital Boost Gauge
ADD W1 52mm Digital Water Temp Gauge
ADD W1 52mm Digital Air/Fuel Gauge
11" Rally Steering Wheel
NRG Black Short Hub Adaptor
NRG Black V2.0 Quick Release
Carbon Fiber Shift Knob
Black & Red Stitch Shift Boot
AutoPower 6-Point Weld-In Roll Cage
Rear Interior Removed
5 Panel Wink Mirror
Stereo & All Wiring Removed.
Rear Wire Tuck
I will add pictures once I am free to upload my pictures. =)
A buddy (Bartender) I use to work with had this Black 93' EG Hatch for a few years in his family. One day he came to work in a brand spankin' new 2012 Chevy Camaro. Long story short, he for one is not mechanically inclined what-so-ever. He told me that he was driving down the street and the whole transmission just stopped working, he couldn't shift gears, push the clutch, . . . nothing.
He didn't feel like paying someone to fix a beater so he had it towed back to his garage and left it. I have wanted one of these things for a long time so I knew I was going to buy it from him. . . . but for how much. I spoke with him for about an hour and he decided that he didn't give a fuck about it so he wanted $50!!!!!!
I fucking grabbed my wallet and handed him that shit ASAP! Grabbed a UHAUL Transport and brought it to my garage. A little tinkering and research over the car and BAM! Runs like new.
Dumbass never kept up the brake fluid and ran out! I told him the next day and he was like wow, oh well. lol
So I picked up a decent looking EG with a little rust for $50. STOKED ON LIFE!
So now its my turn.
How it look when I brought her home:
I drove the car for maybe a week and the head gasket blew on me, my buddy never kept any maintenance on the car what so ever.
So I ordered a new head gasket from my friends at partsource. Love getting AT-COST! =) Fixed that shit in like 2 hours. Back on the road.
Maybe a month later the motor blew up, but thats what you get for a 415+K D15B7. Haha. Went to Pick-N-Pull and picked up another D15B7 for now.
I just had to buy more. went to Pick-N-Pull just to take a peek around, and happened to find myself a 94' Smashed Teggy with KYB Coilovers with Spoon Springs, and a Catback Apexi N1 Exhaust. $125 later I walked out. =)
Ordered myself some JDM LCA's, Front & Rear Adjustable Cambers.
Picked up a Type R Front Lip and Type R Rear Lip, Spoon Duckbill Spoiler, and Dual Halo 1-Piece TYC Headlights off of a fellow beyonder.
Picked up an 11" Rally Steering Wheel and Hub Adaptor, and a triple pillar gauge with 52mm Autometer Oil Temp, Water Temp and Volt Meter, Black and Red Stitch Shift Boot, Skunk 2 Dual Bend Short Throw, and a Carbon Fiber Shift Knob.
Bought a set of 17" Motegi Racing R7's to roll around in other then the steeliness.
Thought of a color scheme and went with Neon Green for the Lip Kit and Spoiler.
Drove it like that for awhile and didn't like how Big the 17" was, do I found a set of 15" Silver Core Racing Sevens, and instantly grabbed some handy-dandy Plasti-Dip and blacked them out with some green accents for the touch.
Was kind of pissing me off that the halos on the headlights would not work and the headlights were pretty beat up themselves, so guess what. . . . NEW SET! Also bought a Supernova H3 8000K HID Kit that came with some FREE Audi Style Driving Lights.
Mounted and Look Mean! =)
And I have been driving it like that for about a year now and feel that I want to do some extensive modding over the 2012-2013 Winter Season.
Picked myself up a sexy 6-Point Roll Cage off a fellow beyonder and painted it Neon Green to match! Picked up a 5 Panel Wink Mirror off a different beyonder.
Taking the entire interior out to change it from that ugly greyish interior and dye it all OEM Black. will look minty fresh.
UPDATE: Got all the interior Panels Painted Gloss OEM Black!
Hoping to do a complete Wire Tuck, Engine Shave, and plenty other things.
Picked up a set on De-Branded FRP Bucket Race Seats
Planning on ordering a set of new Pistons, Rings, Valves, Retainers, Springs, the whole damn works for the B.
And maybe. . just maybe if I come up with the funds, since my newly born baby girl Serenity takes up the wallet now. I may turbo the B.
But we will see.
Also picked up a SWEET Pair of D2S Morimoto Bi-Xenon Retrofit headlights from our good friend Mitch6. Thanks again.
Also picked up a JDM EG6 Projector Fog Light Kit for $20 locally in Calgary!
Currently ordering some rear quarter panels and going to tackle that next, ordering a block plug since I am deleting the rear wiper assembly. Ordering some smoked JDM Amber Corners and Stanley smoked Side Markers. Then I am going to Vinyl Wrap the whole car in High Gloss Black. I am not a big fan of the Matte like Mitch6's ride, but damn he did a good job. May call you soon buddy to give me a hand!. haha I also got started on the wire tuck.
But this is how she sits for now until my rear quarters come in, minus the headlights:
Debating on picking this up and fixing it, guy is selling it for $150. COMMENTS?
That is all for now, Will keep everyone updated on what happens and what else goes in. But in the Meantime, here is a List of everything I can think of.
Thanks for reading!
Give me some feedback and thought of what other things I could do.
Updated List As Of January 9th, 2015
Engine:
96 USDM GSR B18C
AEM Tru-Time Cam Gears
Integra Type R Valvesprings & Seals
3-Way Port & Polish
Gates Racing Timing Belt
NGK Heat Range 7 Spark Plugs
MSD Wires
Drop Engineering Motor Mounts
Drop Engineering Transmission Mount
Painted Valve Cover
Billet Aluminum Oil Filler Cap
K&N Valve Cover Breather Filter
Mobil 1 5W30 Full Synthetic Oil
Integra Type R DC2 Intake Manifold
AEM Black Series Fuel Rail
Hondata Intake Gasket
B&M Fuel Pressure Controller & Gauge
Hondata Metal Plate Head Gasket
Wiseco Low Compression 81mm 8.9:1 Pistons
ACL Race Bearings
Eagle Connecting Rods
Supertech Block Guard
Type R Crankshaft
Transmission:
Integra Type R DC2 LSD S80 Transmission
ACT Heavy Duty Pressure Plate
ACT Stage 2 Clutch
TCC-R Shortshifter
TCC-R Lightened Flywheel
Mobil 1 LSD Oil
Turbo Kit:
CT26 Toyota Supra Turbo
- CNC'd CT26 to T3 Adaptor Plate
- CNC'd Exhaust Outlet Flange
- 2.5" V-Band Flange & Clamp being welded on the turbo exhaust outlet
- Titanium Heat Blanket
- K&N Slim Air Filter
- 10AN Oil Drain Line & Fittings
- 4AN Oil Feed Line & Fittings
- 4AN Coolant Line & Fittings
FullRace T3 Top Mount Turbo Manifold
- Almost Brand New 2000km Used
Tial 38mm V-Band Wastegate & Custom Welded Dump Tube
- V-Band Clamps on both Wastegate & Dumptube Sides
- Current 7PSI Spring
- Additional 10 PSI Spring
2.5" EBay Downpipe
- Intend to weld V-Band Flange & Clamp to mount to Turbo
- Have to custom make to fit properly still.
Chipped P61 OBD1 ECU
- Chipped with a SST 27SF512 Re-Burnable Chip
- Currently with a P30 Basemap
- All Sensors Working
- Soldered in Zero Force Insertion (ZFI) Socket for easy chip removal
- All Main Capacitors Replaced
- All Professionally Done
BLITZ Super Sound BOV
- Has two outlet attachments, one filter and the other is open
- 2 Springs, One for soft and both for hard
- Brand New
- Missing Vacuum Line
EBay Intercooler
- Painted Flat Black
2.5" Charge Piping
- Professionally PowderCoated Black
Stage 1 Snow Performance Methanol Injection Kit
- Switched Solenoid to shut off
- Brand New In Box
440cc DSM Injectors
- Pigtails Included
52mm Prosport Evo Digital Boost Gauge
- With Sending Unit
Miscellaneous Parts
- VMS Mechanical Liquid Filled Fuel Pressure Gauge
- NGK 7 Heat Range Spark Plugs
- Oil Pressure Sending Adaptor for Oil Feed to Turbo
- 10ft of 4AN Stainless Steel Line
- 3ft of 10AN Stainless Steel Line
- Titanium Heat Wrap for Downpipe
- Weldable Bung for Oil Pan
- 2 Weldable Bungs for Downpipe, O2 and Wideband
Engine Bay:
Russel Black AN Inline Fuel Filter Kit
SS Braided Clutch Line (Master to Slave)
Black AN Power Steering Delete Loop Kit
To Order:S2000 Clutch Master Kit
Battery Relocation Kit
Fuse Box Relocation
Engine Harness Tuck
Headlight Harness Tuck
Shaved & Welded Engine Bay
Carbon Fibre Hood Struts
Body:
To Order:VIS Carbon Fibre Hood
To Order:BYS Carbon Fibre Front Lip
Retrofit D2S Morimoto Bixenon Headlights.
Phillips D2S 85122+ 4300K HID
JDM Fog Lights
H3 3000K HID
Blacked-Out Taillights (For Now)
To Order:BYS Carbon Fibre Spoiler
Front & Rear EGR Racing Tow Hooks
Brand New Rear Quarter Panels (Rust Delete)
Antenna Delete
Hood Pins
Wheels & Tires:
To Order: 16X8 Avid.1 AV-05 (BBS Reps)
To Order: Toyo Proxes R1R 185/45R16
To Order: BWR Open End Lug Nuts
To Order: ARP Extended Wheel Studs
Suspension:
Full 96 Spec Type R 4x114.3 Disk Conversion Kit
To Order: Function & Form Type 2 Coilovers (10kg Front & 8kg Rear)
Energy Suspensions PU Bushings Master Kit
Mugen Front Upper Strut Bar
Type R Rear Strut Bar
Type R C-Pillar Bar
GODSPEED Front Upper Control Arms
GODSPEED Rear LCA's
GODSPEED Rear Camber Kit
Aluminum Rear Subframe Brace
Aluminum Lower Tie Bar
24mm Progressive Rear Sway Bar
Exhaust:
Apexi N1 2.5" Catback
Cat Delete
Interior:
De-Branded FRP Bucket Race Seats
3 Pod A-Pillar Gauge Holder
ADD W1 52mm Digital Oil Pressure Gauge
ADD W1 52mm Digital Oil Temp Gauge
ADD W1 52mm Digital Boost Gauge
ADD W1 52mm Digital Water Temp Gauge
ADD W1 52mm Digital Air/Fuel Gauge
11" Rally Steering Wheel
NRG Black Short Hub Adaptor
NRG Black V2.0 Quick Release
Carbon Fiber Shift Knob
Black & Red Stitch Shift Boot
AutoPower 6-Point Weld-In Roll Cage
Rear Interior Removed
5 Panel Wink Mirror
Stereo & All Wiring Removed.
Rear Wire Tuck
Last edited by AutoXRacer on Sat Mar 21, 2015 3:47 am, edited 21 times in total.