K20 & K24
User avatar
By enzoferrari
#292861 Does anyone know the exact weight of a standard D16A9 and a K20A both with gearbox and other accessories?

I'm going to swap the D16A9 on my 1993 Civic Si 4-door sedan with a K20A and I want to know that does the weight difference make any sense in my car handling? Is there any bad influence on it?

Please help me!
User avatar
By Eg6H2D
#293244
enzoferrari wrote:Does anyone know the exact weight of a standard D16A9 and a K20A both with gearbox and other accessories?

I'm going to swap the D16A9 on my 1993 Civic Si 4-door sedan with a K20A and I want to know that does the weight difference make any sense in my car handling? Is there any bad influence on it?

Please help me!


The K series weight is very Close to the SOHC D16z6. with gear box. maybe 10-14 difference. it's not much.

Handling shouldnt be an issue. if anything it will pull the weight alot more better!!

Enjoy! :thumb:
User avatar
By enzoferrari
#293274 D16A9 is a DOHC engine. If you're sure that weight of K20A is very close to D16Z6, so I think that it's closer to D16A9. But it's good to know the exact weight of K20A and D16A9. Does anyone know it?
By bks84
#295216 This compares B to K...
http://honda-tech.com/showthread.php?t=879297

This compares D to B
http://www.superhonda.com/forum/f55/how ... igh-71647/

D = 310+/- (longblock)
B = 401+/- (w/trans, etc)
K 403 +/- (w/trans ect)

couldnt find weights for a complete changeover for the D, but I'd say fully dressed it probably weighs under 350lbs
By EJ1_MK
#296540
Apexracing wrote:K :thumb:



:woot: :woot: :woot: