- Wed Jan 25, 2012 3:24 am
#291838
i put a 1.5vtec engine in a eg saloon it had a b16a2 in it before ! its originally a eg 8 !
everything all bolted in + all loom connected
i started it up and i fired straight away once it got fuel only at idle its bouncing up and down if you get me . i flashed the ecu and got 6 7 10 and 20
the engine came out of eg4 and i drove it when it was in the car and everything was perfect no engine lights ect.
any one any ideas what it could be or anyone experienced a conversion from b to d series?
cheers.
flash codes 6 = throttle position sensor
7= water temp sensor
10=air intake sensor
20=electrical load sensor
everything all bolted in + all loom connected
i started it up and i fired straight away once it got fuel only at idle its bouncing up and down if you get me . i flashed the ecu and got 6 7 10 and 20
the engine came out of eg4 and i drove it when it was in the car and everything was perfect no engine lights ect.
any one any ideas what it could be or anyone experienced a conversion from b to d series?
cheers.
flash codes 6 = throttle position sensor
7= water temp sensor
10=air intake sensor
20=electrical load sensor