Post YOUR Coupe here
By bks84
#285826 Ya I know.
By bks84
#285847 Image


FUUUUUUUUU toe arm!

Image

ohhhh ya just one side done!

Image
By EJ1_MK
#285862 Wow got a lot done yesterday.
By bks84
#285882 Yep, Nick is finishing up the cams now. I'll stop by Honda tomorrow to order a new headgasket, block fittings for catch can, something else I can't remember.

Got the passenger side done, the stubborn toe arm bolt came out with a few blows from the 1/2". All is well now! It's back on slicks and sitting pretty.

Started to replace the stock fuel pump w/the Aeromotive my wife bought and turns out the sock orientation is incorrect. Not sure what to do, so I emailed Jegs and asked if we should send it back, if there's a different sock available or what to do with it.

Thanks for reading.
By bks84
#286434 Got the flare tool today, still waiting on a -5 to -6 adapter from Earls (summit doesnt carry this in stock, so they drop shipped from Earls).

Realized my practice BMC line is not gonna work, so im going to have to make another.

searched google for pictures show how people have ran their lines for reference on how to run mine.
By bks84
#286965 Image

Image

Image

Image

Image

Image

Image


Finally managed to get the assembled. Bent my lines up, mounted the prop valve. All that's left is to bent and flare the cabin lines and then I can order some fluid, pads and rotors.

Thanks for looking.
By EJ1_MK
#286967 Looks nice man starting to come along.
User avatar
By rootbeer_eg
#286968 in the last pic you recently posted of the prop valve why does the hardlines look like there looped together
just curious because im looking into doing this in the near future

and you coupe is sick
By EJ1_MK
#286969
rootbeer_eg wrote:in the last pic you recently posted of the prop valve why does the hardlines look like there looped together
just curious because im looking into doing this in the near future

and you coupe is sick


All civic Master cylinder have two lines out to the prop valve. when you go with the wilwood master you have to do one into both the rear and front sides of the prop valve.
User avatar
By rootbeer_eg
#286970 thanks
so if i dont use the willwod master cylinder i dont have to loop it like that?
By EJ1_MK
#286971 No But you would have to run two lines into your fire wall. Would not recommend the wilwood unless you auto x and or road race on a regular.
By bks84
#287019 Thanks guys.

Tomorrow I wanna get the lines bent up for the interior.
User avatar
By Ecc0
#287029 Coming along real nice but how come you didn't go fu braided on you lines as I found it SO much easier than fiddling about with pipe benders and fittings to get everything right where I wanted it