Civic-EG.com Forum 3.3.1

- Wed Sep 14, 2011 12:38 pm #271914 i will put up the best pics i got of the paint. i do wanna buff the car badly cuz it has scratches n stuff that will come out from a good buff. i drove it alot up until i pulled the motor. and thanks also

- Wed Sep 14, 2011 1:00 pm #271915 here is a pic off a site with coverage from a show i was at. i made it bigger so you could see it good


more pics from a show rite after i got it in 2010



the best pic of it i got with my cell phone to date lol.


hope ya guys enjoy, i will have more to come soon. i just picked up some of my motor parts and a nrg quick release hub as well for it.

Last edited by bserius on Wed Jan 25, 2012 2:31 am, edited 1 time in total.

- Wed Sep 14, 2011 1:03 pm #271917 im gonna add this one a second time but bigger to see. i was having issues the other day with upload sizes on my pics but i think i got it down now lol.

- Wed Sep 14, 2011 4:20 pm #271939 +1 vote ! ;) Look so agressive ! Nice work !

- Wed Sep 14, 2011 4:50 pm #271946 thanks alot man

- Wed Sep 28, 2011 1:56 pm #275065 bserius how did the Professional products Intake manifold and throttle body worked?
im thinking bout doing that setup, what are your opinion on them?

"If you have poo, fling it now"!.

- Thu Sep 29, 2011 1:26 am #275171 great stuff, priced well. i even went with the polished and still was cheap. when i pulled my last gsr swap outta the hatch my plan was h2b but couldnt refuse 500 for full gsr swap so im back where i started but the motors all new atleast being i decided to rebuild. id say do it man

- Wed Oct 05, 2011 12:29 am #276236 little update, no pics . got a new 1000 watt alpine amp and a single 12 jl audio bandpass and stepped from 2 to 1 alpine type r 12 and its loud as hell, also added nrg thin hub and quick release. most of all picked up the head gasket and my acl bearings came today. total seal rings come in this week then i need arp head studs and timing belt and its done . also got my p72 chipped today for my setup so things are coming together good now.

- Wed Oct 05, 2011 5:13 pm #276359

little update, no pics . got a new 1000 watt alpine amp and a single 12 jl audio bandpass and stepped from 2 to 1 alpine type r 12 and its loud as hell, also added nrg thin hub and quick release. most of all picked up the head gasket and my acl bearings came today. total seal rings come in this week then i need arp head studs and timing belt and its done . also got my p72 chipped today for my setup so things are coming together good now.

- Wed Oct 05, 2011 6:30 pm #276368 so what are you planning to do for the swap? NA, SC, or Turbo?

YC Underground Tuned

- Thu Oct 06, 2011 12:16 am #276419 maybe turbo down the road once i get back on my feet n get back to work. motor is all fresh so should be able to make a good 250 to 300 easy and not have issues. i set my goals low that way in the end im happy lol

- Sat Oct 08, 2011 7:24 am #276766 btw guys i just updated my other rides section on here added my ef/ dc2 build and put up a bit of pics. drop in there and tell me what yas think.

as for an update on the hatch i picked up the rings today so the bottom end can be assembled anytime now. i need a timing belt yet and arp head studs. i also junked the blox pos lcas and got a skunk2 set along with a wicked tuning rear camber kit from weksos. i am dropping my valvecover off sunday to the guy who did my last airbrushed cover.

- Thu Dec 29, 2011 4:16 pm #287518
well as ya can see by the pics i made a bit of changes on this since last pic of the motor i put up and it is about ready to go in. i bought my old valvecover back, skunk2 intake manifold, alpha tb, tuner1 cams, arp head studs, acl bearings, total seal rings, itr oil pump, etc. all kinda good new stuff


had to bring the interior a little more to life for this year, takata harnesses, nrg thn hub, nrg quick release, fd2 type r shift knob, new alpine 1000 watt amp, sold one of my type r 12s, etc. and more to come

also re wrapped everything u can see that is red due to being dirty and stained up bad


well had to have a parts pile pic so ppl dont tell me im lying about whats done to it lmao


finally got me some bumper quick releases cuz im a lazy ass n hate to take the bumper off. now its easy to do


well heres a throwback with what i started with, i know very gay lol but i actually had a kid tell me he likes this more than what i got now lmao


another throwback rite when i got it. that is my buddys built 2.0 sleeved lsvtec turbo da, its caged, sparco seats, 5zigen fn01r wheels. very nice car. made 400whp on 13psi this yr and had some issues with the new turbo so its been sitting since october.

Last edited by bserius on Wed Jan 25, 2012 2:28 am, edited 1 time in total.

- Thu Dec 29, 2011 4:34 pm #287524
passenger side bay close up


driver side bay close up


wood grain vinyl ecu cover i just did. got more parts in mind to do

some of my wheel phases to follow:

polished nippon ma86s


bronze slips i painted


rota auto x


drag dr29/ rota circuit 10 same shit lol


current and favorite, konig wideopen. i do plan to sell these and buy the enkei j speed 15x8 +25 in black with polished lip but idk when yet.

Last edited by bserius on Wed Jan 25, 2012 2:29 am, edited 1 time in total.

- Thu Dec 29, 2011 4:38 pm #287525
here is my integra i taded for my marble hatch before all this fun began.


the teg and my daily beater ef i had at the time.


the ef at its best. this car was a disaster when i picked it up so i spent quite a bit n made it a cool little car.