Civic-EG.com Forum 3.3.1

- Wed Mar 02, 2011 2:22 pm #241805 Hi all I was at the junkyard and noticed a 93 civic ex sedan had a rear sway bar which looked oem (not sure if Honda made oem rear sway bar) but I was wondering if it will fit in my civic coupe thanks guys

- Wed Mar 02, 2011 2:34 pm #241807 Should have no isses there. I have an integra front and rear in my ej2

- Wed Mar 02, 2011 2:38 pm #241808 Thanks should I swap out control arms to make this just a one trip to the junkyard.

- Wed Mar 02, 2011 3:09 pm #241811 Well you will need the control arms(lower) for the rear becuase your stock civic dosen't have the hole to bolt it on. As for your front if you decide to put one in you can get the rear half of the lca(they come apart) .. But

- Wed Mar 02, 2011 3:12 pm #241812 You will need the right half for a front sway bar install http://www.google.ca/imgres?imgurl=http ... 29,r:9,s:0

Stock rear on top integra on bottom

http://www.google.ca/imgres?imgurl=http ... 74&bih=483

- Thu Mar 03, 2011 1:10 am #241898 the sway bars will fit get the lower control arms to go with it so you will have the mounting spots for them and dont for get the SB brackets too.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Thu Mar 03, 2011 2:15 pm #241990 Cool thanks asianrob