- Thu Nov 11, 2010 1:33 pm
#222557
hello guys, my name is faed from Malaysia, I bought this car on sept 2006 in standard stock condition and with poor D15B auto transmision. after 6 month, i start my project on this car. I've swap B18C (manual transmision) engine taken from DC2 type Si VTEC halfcut + 4-1 custom header + blitz air filter with simota 3"air ram, 2.4" piping and 2.3" inlet 5zigen bordermax R.O mufler which costing about MYR12,000 (3500usd).
other thing that i changed/replace on my civic from 2007 to 2008:
1- rear jdm EG9's trunk
2- spoon rims 15" (immitation)
3- DC2R's red RECARO
4- DC2R's front strut bar
5- DC2R's momo steering
6- DC2R's knob gear
7- DC2R's shift boot cover
8- DC2's arm rest
9- rechiped P72 ecu
10- spoon cf look side mirror
11- ultra 8mm silicone plug cable & NGK irridium spark plug
on 2008, i start to convert my face lift, i take off eg9's front bumper and i replaced it with eg6 front bumper c/w yellow foglamp.
this is my car looks, 2 years ago..
last 2009, i DIY paint the new color to my car "sparkle grey".
not so perfect becoz this is my 1st try...but i've enjoy it so much. and i take out the projector headlamp and put in new DEPO smoked head lamp + corner amber.
on jully 2010, i plan to upgrade my engine's perfomance. after a month of survey, i decided to make my new engine with this spec:
01- ACL race bearing (main and rod)
02- PCT piston
03- PCT camshaft
04- PCT valvespring
05- Skunk2 intake manifold
06- S90 70mm throtle body
07- HKS lighten flywheel
08- Trinity clutch set
09- mitsubishi eterna 2.5L fuel pump
10- Apexi VAFC 01
11- Works engineering Cams gear
12- 2.5" piping set with 5zigen pro racer mufler
13- INFINITE acura's double layer alluminium radiator
so....this is my civic looks now...
[/img]
other thing that i changed/replace on my civic from 2007 to 2008:
1- rear jdm EG9's trunk
2- spoon rims 15" (immitation)
3- DC2R's red RECARO
4- DC2R's front strut bar
5- DC2R's momo steering
6- DC2R's knob gear
7- DC2R's shift boot cover
8- DC2's arm rest
9- rechiped P72 ecu
10- spoon cf look side mirror
11- ultra 8mm silicone plug cable & NGK irridium spark plug
on 2008, i start to convert my face lift, i take off eg9's front bumper and i replaced it with eg6 front bumper c/w yellow foglamp.
this is my car looks, 2 years ago..
last 2009, i DIY paint the new color to my car "sparkle grey".
not so perfect becoz this is my 1st try...but i've enjoy it so much. and i take out the projector headlamp and put in new DEPO smoked head lamp + corner amber.
on jully 2010, i plan to upgrade my engine's perfomance. after a month of survey, i decided to make my new engine with this spec:
01- ACL race bearing (main and rod)
02- PCT piston
03- PCT camshaft
04- PCT valvespring
05- Skunk2 intake manifold
06- S90 70mm throtle body
07- HKS lighten flywheel
08- Trinity clutch set
09- mitsubishi eterna 2.5L fuel pump
10- Apexi VAFC 01
11- Works engineering Cams gear
12- 2.5" piping set with 5zigen pro racer mufler
13- INFINITE acura's double layer alluminium radiator
so....this is my civic looks now...
[/img]
Last edited by faedzB18C on Fri Nov 12, 2010 4:44 am, edited 1 time in total.
mary xmas 
