ECU, Wiring, Sensors
User avatar
By drew_ej2_owner
#218892 ok guys i took the clock out not too long ago to have it glow red n i put it back in and everythin was good.. but a couple of days ago it stopped coming on, what could this be?
User avatar
By newbie101
#218893 Could be the ground behind the dash cluster. Mine is loose (I think) and it seems to mess all that stuff up. I would check that first since it used to work but now it doesn't. I don't remember if there is a separate fuse for that or not. . . does anything else not work?
User avatar
By drew_ej2_owner
#220055
newbie101 wrote:Could be the ground behind the dash cluster. Mine is loose (I think) and it seems to mess all that stuff up. I would check that first since it used to work but now it doesn't. I don't remember if there is a separate fuse for that or not. . . does anything else not work?

uhmm not to my knowledge.. my cluster woorks fine n i believe my hazardz too
User avatar
By Ajax1989
#220069 put it in a friends eg, it dont matter wat model and if it works then someting is wrong wit ur wiring, if it doesnt then the clock is bad
User avatar
By chrono404
#220110
drew_ej2_owner wrote:
newbie101 wrote:Could be the ground behind the dash cluster. Mine is loose (I think) and it seems to mess all that stuff up. I would check that first since it used to work but now it doesn't. I don't remember if there is a separate fuse for that or not. . . does anything else not work?

uhmm not to my knowledge.. my cluster woorks fine n i believe my hazardz too


my Dash ground was unhooked and the cluster worked just fine. I dont recall if the clock had issues but I know I when I turned off the car the radio would be on for 2-3 seconds afterwords. When I pluged it back in all my strange issues went away.