Civic-EG.com Forum 3.3.1

- Tue Sep 14, 2010 7:13 am #213584 I got a 94 civic dx P06 and was wondering what would be good to go with on my build for ecu wise, Or if I should just go with this http://www.phearable.net/shoppingcart/c ... -p-32.html

[teal_dx]

- Tue Sep 14, 2010 1:56 pm #213608 tell us the specs of your build

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Tue Sep 14, 2010 2:05 pm #213609 B18A1
Arp Headstuds
Arp connecting rod bolts
Arp flywheel bolts
Stage 3 clutch 12 lb flywheel.
Cometic Headgasket .027
Walboro 255 fuel pump
440CC Injectors
Stage 3 clutch 12 lb flywheel.
Gates timing belt
T04E turbo
38mm wastegate
2.5 exhaust piping
stock pistons and rods
Nippon piston rings. 10 Psi on boost
AEM Wideband

Also would I need to run VAFC or not been told different things however I am not doing Vtec. So if you could help with that question to lol. Thanks

- Tue Sep 14, 2010 2:15 pm #213610 after having your ecu chipped you won't need the vafc,also you might want to look into http://xenocron.com/ ,i get my stuff from them and are cheaper

[teal_dx]

- Tue Sep 14, 2010 5:04 pm #213636 Yeah ditch that VAFC, it is 10 yr old technology. A chipped & tuned ecu will be more reliable

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Sep 15, 2010 6:05 am #213799 Ok great just checking and all was unsure of ecu and good thing I did not buy vafc