- Tue Jul 20, 2010 7:31 am
#205431
Well my roommate has a 92 Acura integra. An my prob is that when Im taking it through its gears it kinda bogs out an stops accelerating around 3 thousand then kicks back around four. My question is, why is that an how can i fix it? A little info on the motor, its a b18a1 An is completly rebuilt for turbo. But still n/a for now. Any help will be great. Thanks
- Tue Jul 20, 2010 10:02 pm
#205526
is the ecu throwing any check codes?
- Wed Jul 21, 2010 1:31 am
#205552
have you double check the ecu wring connections? or like metioned above, does it flash the CEL? 
- Wed Jul 21, 2010 1:45 am
#205555
assuming that the car hasnt really been modded or torn apart make sure that the light actually works. some people pull the bulb to make you think its not on.
so key over the ignition and see if it pops on for a second. if not theres prolly a cel.
get a bulb and stick it in there then i beleive its by the ecu where you car use a paper clip to jump the connection and the check light will blink your code.
since its obd1 you cant just look at the little blinky light like obd0
so key over the ignition and see if it pops on for a second. if not theres prolly a cel.
get a bulb and stick it in there then i beleive its by the ecu where you car use a paper clip to jump the connection and the check light will blink your code.
since its obd1 you cant just look at the little blinky light like obd0
- Wed Jul 21, 2010 10:28 pm
#205677
ahhh i see i appologize for my mistake
and id give it some plugs and wires dist. cap and rotor. see if that helps
and id give it some plugs and wires dist. cap and rotor. see if that helps
- Thu Jul 22, 2010 6:38 am
#205725
get some pics of the bay, and what ecu is on the car?
1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300