ECU, Wiring, Sensors
User avatar
By whitedxi
#172960 I found this on the web:

white - 12V constant
yellow - ignition, off when starter is initiated
yellow w/black- ignition, on when starter is initiated
black w/white- starter
white w/black- acc, on with ignition, off when starter is initiated

Which wires do I need to contact to my relay?
User avatar
By TrailerTrash
#172966 my guess would be yellow with black but im far from the expert
By nickbrungard
#183972 Not sure what your looking to do. Seems the wire info you found will be the colors by the ignition switch.
User avatar
By whitedxi
#183982 got it working :thumb:
User avatar
By Dippin_EG
#184000 Post results!! maybe people want to know this. :thumb:
User avatar
By kamikaza
#184005 Image
here is scheme of ignition switch...so, black/white wire is the wire you need to switch from ignition switch to your new starter button...or just cut it and install direct form battery...if you need scheme with relay, i can draw it later...cheers :thumb: