- Sat May 01, 2010 6:05 am
#191274
By the way that boost gauge setup is sick and so is 92.3
- Fri Oct 29, 2010 5:39 am
#220636
id like to throw in that teflon tape is a must with the oil lines, i tried other anerobic sealers and they just blow out. also a good idea is to weld all your intercooler piping together less chance of blowing hose connectors! I can definitely say that this is one of my personal favorites.
- Sat Nov 13, 2010 4:05 pm
#222771
new to turbos, but i will be building and turboing my z6 in the spring.
Very helpful diy. Is a strait return line better then a catch can?
Very helpful diy. Is a strait return line better then a catch can?
94 blue lx sedan (sold)
95 black ex sedan (wrecked)
93 white z6 del sol (Sold)
95 red y8 hatch (sold)
98 red coupe
95 black ex sedan (wrecked)
93 white z6 del sol (Sold)
95 red y8 hatch (sold)
98 red coupe
- Sun Nov 14, 2010 12:49 am
#222819
a straight line will not 'catch' blowby (oil residue) and it will get sucked back into your intake/turbo. A catch can will keep things cleaner
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Tue Dec 21, 2010 2:46 am
#228971
does anyone have any info on the vitara build?
- Tue Dec 21, 2010 3:39 pm
#229060
well i have a vitara built z6, i can try and answer some of your questions... or i could point you in the right direction!
let me know what you got...
Mcswens wrote:does anyone have any info on the vitara build?
well i have a vitara built z6, i can try and answer some of your questions... or i could point you in the right direction!
let me know what you got...
- Thu Dec 23, 2010 4:12 am
#229419
i was wantin too build a lower compression turbo motor. i was wonderin where to order those pistons
- Fri Feb 11, 2011 5:44 am
#238023
I had a quick question i was thinking about boosting my d16z sohc in my eg, and i was curious how much it ran you to do boost yours all together. also do you think its worth it? Please get back to me if you can.
Thanks for your time!
-Jarrett
and heres a pic of my eg
Thanks for your time!
-Jarrett
and heres a pic of my eg
- Fri Feb 11, 2011 2:25 pm
#238074
It depends if you shop around for the parts and find good deals. I don't know off the top of my head how much I spent total with all of the misc things like fittings... etc
To be safe, have some extra $ set aside because there's always going to be something you didn't plan on buying/fixing that needs to be done.
To be safe, have some extra $ set aside because there's always going to be something you didn't plan on buying/fixing that needs to be done.
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Fri Feb 11, 2011 9:36 pm
#238117
fj distributors is your one-stop shop for vitara builds
http://fjdistributors.com/product_info. ... cts_id=285
also an excellent vendor
Mcswens wrote:i was wantin too build a lower compression turbo motor. i was wonderin where to order those pistons
fj distributors is your one-stop shop for vitara builds
http://fjdistributors.com/product_info. ... cts_id=285
also an excellent vendor
street machines > dyno queens
z6 turbo power FTW tuned on crome
z6 turbo power FTW tuned on crome
- Fri Feb 25, 2011 8:06 am
#240866
thanks bro
d-mon wrote:Mcswens wrote:i was wantin too build a lower compression turbo motor. i was wonderin where to order those pistons
fj distributors is your one-stop shop for vitara builds
http://fjdistributors.com/product_info. ... cts_id=285
also an excellent vendor
thanks bro
- Page 2 of 4
- 1
- ,
- 2
- ,
- 3
- ,
- 4