FAMILY EXPRESS Civic coupe EG, b18c Black traffic!

Post YOUR Coupe here
 Reply
User avatar

FAMILY EXPRESS Civic coupe EG, b18c Black traffic!

By turing
- Tue Sep 15, 2009 1:45 pm #143819 13.10.2008, 15:15
B18C1, specs:
` 09 Gasoline pump Walbro 255 л\ч
` 09 Seats from civic type-r (EP-3)
` 09 the Wheel sparco rally 350 leather
` 09 the Rumpled adapter of a wheel momo
` 09 Led the instrument panel hand made
` 09 the chamber back kind + Parking gauges
` 09 the Broken muzzle
` 08 b18c jdm+5мкпп, p72 jdm
` 08 hondata s300
` 08 admission: green air (`09 air pro +)
` 08 release: 4-2-1 supersrint+HKS Super Drager
` 08 suspension bracket: KYB AGX+ springs bomz-racing
` 08 back aluminium levers D2
` 08 forward stabilizer a drain
` 08 back from vti
` 08 brakes: before 262мм from Integra (`09 we will soon replace with more productive...)
` 08 back disk from civic vti
` 08 reinforced hoses on a circle
` 08 wheels kosei K1-TS К15 + yokohama avs (`09 now A-tech final speed R16+ bridgestone playz)
` 08 crystal optics (`09 now with lenses sonar)
` 08 xenon 5000к (`09 has burnt down, now too 5К)
` 08 behind led optics
` 08 carbon fiber a cowl (`09 it is sold, now metal)
` 08 forward skirt from vti (`09 it is sold)
` 08 made the aerial and repeaters lateral light
` 08 it is completely recoloured one year ago in black (`09 prepares for painting)
The motor is issued in documents 140 forces!
13.10.2008
FAMILY EXPRESS 180 forces and the main thing a luggage carrier!!!
Image
Image
Image
Image
Image
Image
Image
Image
Image

Such they different....
Image
Last edited by turing on Tue Sep 15, 2009 5:53 pm, edited 2 times in total.
User avatar

By LaMbErT*
- Tue Sep 15, 2009 3:04 pm #143835 not keen on the bonnet but the rest looks really clean !
User avatar

By turing
- Tue Sep 15, 2009 4:57 pm #143888
teal_dx wrote: Nice black coupe reguardless :thumb: 8)

Thanks!!!
User avatar

By turing
- Tue Sep 15, 2009 5:23 pm #143896 Has decided to write clumsy language.... And that, simply photos will be not absolutely clear. For knowledge of language not to kick...
Has started to understand with cornet light, and there....
Water in both....
Image
With it is left plus is torn off and has been short-circuited on weight, In a consequence that has fused a safety lock (in salon it) - has replaced, wires connected for what it was necessary to cut a counter slightly!
Image
Image


On the right side the cartridge in general is split, this consequence of the former failures, search and after replacement will be a buzzing...

Image
Image
User avatar

By turing
- Tue Sep 15, 2009 5:29 pm #143897 It is all it is made till 2009.
Has got me whistle in ac at the got car... Has cleaned these problems by means of audio of filters
Image

Has changed atomizers of a washer of a windshield on volvo which spray a torch...
Image

Well also has bought seats from type-r EP3, I will put!!!
Image
Image
User avatar

By turing
- Tue Sep 15, 2009 5:35 pm #143900 New spare parts are got
Stick from integra type-r
Image

While pottered with brakes has paid attention that installing the reinforced hoses on a circle
Image

Has bought micro diodes and resistance for change of colour of buttons at the included dimensions; in comparison with the usual diode...
Image

In comparison with a match
Image
Image
Image

As a result has revealed two problems:
1. To solder improbably difficultly - has soldered
2. And the most important thing they shine very poorly - we will search more and on stronger for light-emitting diodes.
User avatar

By PandaHatch
- Tue Sep 15, 2009 5:45 pm #143906 nice ride. good luck with the lights. I love those seats. :thumb:
User avatar

By PandaHatch
- Tue Sep 15, 2009 5:54 pm #143908 nice ride. good luck with the lights. I love those seats. :thumb:
User avatar

By turing
- Tue Sep 15, 2009 5:54 pm #143909 Has corrected specs on the first page
User avatar

By turing
- Tue Sep 15, 2009 5:56 pm #143911
PandaHatch wrote:nice ride. good luck with the lights. I love those seats. :thumb:

Thanks! They too are pleasant to me, all is better than regular broken... Now I plan to sell them and to put recaro
User avatar

By turing
- Tue Sep 15, 2009 6:04 pm #143916 We continue history...
There are seats from ЕР3, will put on eg - not a question
To begin with we remove plastic overlays with side seats. The handle it is taken accurately out, it sits on a paint which Japanese add for more reliable fastening
Image
We turn off on two bolts from each party, they are marked by factory a green paint. Accurately we disconnect three ropes
We disconnect a back from a pillow.
Image
Image

Then by a thin flat screw-driver it is accurately hooked plastic clips (white clip-on earrings), the main thing them not to break - haste is not necessary!
Image
Image

Further we try on and we look where that does not approach
Image

Write, you in general understand me? I have in view of my translation from Russian.
User avatar

By turing
- Tue Sep 15, 2009 6:54 pm #143924 And so one fastening it is left as is, and three it is shortened also one which fastens to a floor hardly it is developed - it will be a little at an angle. Aim to lower a seat as it is possible more low. As it was then found out, do not make so at folding it would touch a ceiling. A roof at ЕG nevertheless more low, than at ЕР.
Image

Then all is turned in and tried on some times. Fastenings separately from a skeleton are fastened into place, then all is taken by a semiautomatic device, acts in film and scalds.

My father that I without it did. The designer from god, all that I am able, thanks to it
Image

After procooking of arms I have decided to paint all design that custom was up to standard.
Image
Image
Image
 Reply
Return to Your Ride - Coupe