Civic-EG.com Forum 3.3.1

- Fri Jun 26, 2009 7:52 am #126050 cool man it looks good.

- Thu Sep 10, 2009 4:54 am #142762 Love it. getting ready to do ex pockets in panels with tweed and do the headliner

- Thu Sep 10, 2009 6:48 am #142776 Looks great, do you have a installed pic ?

- Mon Aug 16, 2010 7:16 pm #209179 I did this it was very easy and turned out awsome

- Thu Mar 17, 2011 7:49 pm #244529 cool write up just one question. how deep were the screws used to reassemble the trim?

Support Japan buy JDM

http://civic-eg.com/viewtopic.php?t=19373

[Ajax1989]

- Thu Mar 17, 2011 10:21 pm #244552

cool write up just one question. how deep were the screws used to reassemble the trim?

when i did mine, i had to use small screws if u use to big it will go through it

but id say less then 1 inch

- Fri Mar 18, 2011 9:28 am #244637

cool write up just one question. how deep were the screws used to reassemble the trim?

when i did mine, i had to use small screws if u use to big it will go through it

but id say less then 1 inch

cool thanks, i might re-trim the doors this weekend

Support Japan buy JDM

http://civic-eg.com/viewtopic.php?t=19373

- Fri Mar 18, 2011 10:10 am #244638 Did mine with tweed fabric. Kept it somewhat oem looking.

http://www.myspace.com/162197260

- Sat Mar 19, 2011 9:46 pm #244908 did mine as well, thanks for the write up

- Sat Mar 26, 2011 12:09 pm #246343 just finished retrimming my doors today came out better than i expected this thread made it easy to do thanks for the info guys

here's a couple of shots showing before and after

before


after

Support Japan buy JDM

http://civic-eg.com/viewtopic.php?t=19373

- Tue Apr 05, 2011 2:04 pm #248500 Great write up! iv got mine apart and going to get the fabric. The dremel is the way to go to get the plastiweld tabs. this diy helped alot. pics to follow!

- Sun May 22, 2011 1:39 am #256245 I didn't use tweed, but ended up using vinyl. I'll get some better pics tomorrow.

1993 EX Coupe & 1999 328I
My EJ1 Build Thread
Coupe Crew #9

- Tue Sep 06, 2011 2:33 am #270523 Nice write up quick question. I'm going to re-wrap my door panels I have a sedan so how many yards should I get?

http://civic-eg.com/viewtopic.php?t=17296
My for sale thread check it out!
http://www.civic-eg.com/viewtopic.php?t=25828

#3 CivicEG.com Ferio Squad

- Tue Sep 06, 2011 3:24 am #270533 i got 2m x 1m and i have enough left over

build thread: viewtopic.php?f=61&t=17304

- Fri May 30, 2014 12:45 pm #345998 Hey Guys

I am re wrapping my door panels and I am stuck on how to remove those plastic rivets to get to the fabric. I've been checking it out and I think that heat has been applied to the rivets. any Ideas on removing them?


Thanks!@

All right everyone, line up alphabetically according to your height.