If you have anything other than a 92-95 Civic, post it in here
User avatar
By chrono404
#138219 I Love 99-00 Hatchs. The 96-98's are Nice, But the 99-00 Hatchs are where its at. As much as I love EK Hatch's when you are done building it you will have 3 Hatch's, For your next ride choosing a Sedan or Wagon might make a more Covenant option for Daily Use.
User avatar
By Civic_HatchSI
#139366 I finally bought a car to drop in the gsr.

Not exactly what I planned on buying but it was cheap and less work for me in the end.

1992 Integra GS 5spd. Picked it up for $500 in mint condition. Only thing wrong with it is a blown head gasket and cracked windshield. Body is all original with no fill.

I am picking up the car tomorrow so I should have some pictures up then.

B17 should be all put together by next week, then I can pull out the stock b18a1 soon.
User avatar
By Civic_HatchSI
#139622 Haha was a fun drive getting this car home. Took about 2 hours the car knocks real bad but surprisingly it wasn't overheating.


Image

Image

Image

Image

First thing I need to do is fix the small hole on the door and replace the windshield.
User avatar
By Project_EG6
#139648 Jesus Holly!!! :shock: How many vehicles do you have now? lol Very nice pickup btw
User avatar
By Dippin_EG
#139814 Can i buy your GSR engine harness??? :hehe: :thumb:
User avatar
By Civic_HatchSI
#139866
Dippin_EG wrote:Can i buy your GSR engine harness??? :hehe: :thumb:


haha I told you I need it. I am swapping everything over to the gs. I don't want to cut the harness I am just going to change it over.

I would sell it to you otherwise.



Alright so I got around to cleaning out the car yesterday. Didn't find anything to weird just a odd looking pencil made into a piece a bark lol.

Image

Image

Image

Image


I swapped out the tail lights for the gsr clear/red. Put the gsr badge on.
Today I am removing the rear bumper to fix the bubble starting around the quarter panel. I may need a driver side door, due to the rust on the bottom and the window not closing properly.

Image

Image
By Method
#139874 that green snatchback rhd?
User avatar
By Dippin_EG
#139957
Civic_HatchSI wrote:
Dippin_EG wrote:Can i buy your GSR engine harness??? :hehe: :thumb:


haha I told you I need it. I am swapping everything over to the gs. I don't want to cut the harness I am just going to change it over.

I would sell it to you otherwise.



ok, ok. just keep me in mind if you ever want to part with it. :wink: :D
User avatar
By Civic_HatchSI
#140000
Dippin_EG wrote:
Civic_HatchSI wrote:
Dippin_EG wrote:Can i buy your GSR engine harness??? :hehe: :thumb:


haha I told you I need it. I am swapping everything over to the gs. I don't want to cut the harness I am just going to change it over.

I would sell it to you otherwise.



ok, ok. just keep me in mind if you ever want to part with it. :wink: :D


will do
User avatar
By Civic_HatchSI
#140296 Finally got rid of the gsr last night. Got most of it all stripped then had it towed away. What a task, nothing on that car was solid we had no jack points at all.

Image

bye bye pos!!!


Anyways so now the focus is on the GS. Just pulled it into the garage last night, going to start fixing the trunk and small hole in the quarter.

Before I decide to swap in the B17 I am going to see if I can get that B18 to run correctly. It has a really bad knock, but then again the oil was pretty much like glue when I checked it lol.
By adam_eg
#140386 wow that thing was rotten, good find on them both though you got them well cheap, wish we had cars like that over in this country, never heard of a b17, very strange, look forward to seeing more updates
User avatar
By Civic_HatchSI
#140582 Installed a Pioneer deck and ford cup holder today.

Image

Finished with the patch behind the molding, and fixed the trunk holes. Was easier to just remove the wing instead of patching around it.

Image

Image

Image

Image

Rocker is all patched and painted.

Image

next task lol

Image
User avatar
By Dippin_EG
#140818 hey, i got a question for ya. In the engine bay, how many connectors are there on the drivers side? You've got a GS, right?

The reason being, i am having a terrible time fitting the ls harness to the GSR chassis, because the pins are different, and there is a couple extra plugs in the bay.

If it only has one connection on the drivers side, then i can get a GS harness, and my woes might be over, until then, i am going crazy with this wiring BS.

thanks.