Breaking it in.

J30, J32, J35 & J37
 Reply

Breaking it in.

By franklinhid
- Tue Aug 18, 2009 4:50 am #138444 J32a2 from a tl-s
03 accord 6sp tranny
hasport mounts n axels

Image
Image


any questions ask away. i have an extensive amount of knowledge about it.
User avatar

By 3kkl3sia
- Tue Aug 18, 2009 4:53 am #138446 how much $$$$?
power output?
User avatar

By ohDirka
- Tue Aug 18, 2009 4:56 am #138447 wow just wow...beautiful man :thumb:

By franklinhid
- Tue Aug 18, 2009 5:03 am #138449
teal_dx wrote:Kudos to you man... first J swap on the site :woot:
what better than to stuff in that beautiful bay :thumb:


woot. and thanks


as far as money goes.

Im going to be completely honest. honda tunings article isnt soo true. its basically gunna run u about the same as a k. about 4-6k pending which motor/trans u go with and how much of a deal u can find.

as far as power.

my setup consist of around 260hp with about 240ish+ tq.

i havent dynoed it yet. but that about what i hope to see. there is no tuning avail so we are gunna tune on a simple vtec controller for now n see what we can do.
User avatar

By 93hatcheg
- Tue Aug 18, 2009 4:36 pm #138553 well im gonna say that pretty much the sickest swap iv ever seen :thumb:
not to mention that the engine is wayyyyy cool but to be put in such a nice car just tops it off. good build man
User avatar

By Ajax1989
- Tue Aug 18, 2009 10:11 pm #138649
BLaCkSiLo wrote:kickass man! :thumb:

did you have a k earlier? :?

anyway, sick


ya he had a K

but DAYUMMMMMMM
:jerkbow:
im speechless :thumb: :thumb:
User avatar

By Punksz6
- Tue Aug 18, 2009 10:36 pm #138656 SICKNESS!! WAY 2 GO MAN!! :woot:

By Method
- Wed Aug 19, 2009 4:29 pm #138800 what do you use for a hood?
User avatar

By mistergou
- Wed Aug 19, 2009 8:39 pm #138855 looks great!! :thumb:
User avatar

By Civic_HatchSI
- Wed Aug 19, 2009 10:27 pm #138873 wow just great! I can't wait till someone does this in my area. Did you cut your factory hood for it to shut properly?
User avatar

By teal_dx
- Thu Aug 20, 2009 1:37 am #138891 the first company to offer a CF oem hood with a bulge to clear the swap kind of like how talons had a bulge to clear the cam gears is going to strike gold.
Or a cowl induction hood would clear too.
User avatar

By MI_excoupe
- Thu Aug 20, 2009 2:00 am #138892 Damn... thats a sick ride. I've always wanted to do a J swap one day. You are the man :thumb:
User avatar

By BLaCkSiLo
- Thu Aug 20, 2009 1:54 pm #138936
teal_dx wrote:the first company to offer a CF oem hood with a bulge to clear the swap kind of like how talons had a bulge to clear the cam gears is going to strike gold.
Or a cowl induction hood would clear too.


cowl induction.... :lol: but i agree, a custom hood would be key!
 Reply
Return to J Series