how do i get my car even lower????

Springs, Struts, Swaybars, Bushings, Tower Braces & more
 Reply
User avatar

By Greasedmonkey
- Mon Jul 27, 2009 9:03 pm #133665 There is for the rear. You can cut the spring perch on the rear shocks to allow you to lower it more. Not really much you can do to the front.
User avatar

By zeppelin101
- Mon Jul 27, 2009 9:19 pm #133667 Depends how much effort you wanted to go to, I know a variety of people who have hacked up their strut towers and welded extra bits in to enable them to go lower.

True story.
User avatar

By Benj
- Mon Jul 27, 2009 9:55 pm #133676 throw up a pic of how low you are.... i wanna see this, cuz im of stop shocks with a cheap ebay coil over sleeve and i sit about 1 inch off the ground in the front and 3 in the rear if that
User avatar

By Greasedmonkey
- Mon Jul 27, 2009 11:39 pm #133701 show us a pic of how your sleeves are on your shocks.
User avatar

By Mr. Pink
- Tue Jul 28, 2009 12:12 am #133716 what function does being lower than you are serve? you will have axle binding and other things that you will have to replace every 5k or so.
User avatar

By Dippin_EG
- Tue Jul 28, 2009 12:16 am #133720
Mr. Pink wrote:what function does being lower than you are serve? you will have axle binding and other things that you will have to replace every 5k or so.


x2. i thnk it looks good the way it is, dude.
User avatar

By Ajax1989
- Tue Jul 28, 2009 12:49 am #133722 just cut the coils.. duh...

lol
i have agree with mr. pink and dippin_eg

it looks good the way it is :thumb:
User avatar

By Punksz6
- Tue Jul 28, 2009 1:23 am #133727 If u wanna go lower than I would think about getting some extended top hats, ur struts aren't gonna have alot of life left if there's not enough travel for them... And it does look good the way it is! :)
User avatar

By jmsplitfyre
- Tue Jul 28, 2009 7:24 am #133764 That looks pretty ok to me.. If you put it lower then I'm afraid you're gonna scrape the ground.. But if you still want to go lower, may I suggest lower profile tires?
User avatar

By egsedanguy
- Tue Jul 28, 2009 3:43 pm #133832 ok last night i did a lil measurments and the lowest part of my car sit now at just over 2in. so lowering any more its gonna be to low... its my traction bar, and the core support... so i dont feel like slamen the bar or bending the core support.. so front is stayen the way it is.. now what about the back??? i think i can get it 1 more inch lower...
User avatar

By chrono404
- Tue Jul 28, 2009 6:35 pm #133870 if your rocking ebay coils they sit in the little cup on the back springs, just cut the sides of the cup so you can get your sleeves to go down farther.
 Reply
Return to EG Chassis Suspension