- Wed Jun 17, 2009 1:56 pm
#123612
well iv just bought some gauges for my eg9. im sarting with the rev gauge. i have the part of the dash around the clocks out. ok so there is 3 wires a red a black and green. the red goes to a power source which is only on when ignition is on and iv that found. the black is a ground and iv also found that. ok so the green one has to get the reading for the revs. those anyone no where i should connect this, any help on connecting this is greatly appreciated.
- Wed Jun 17, 2009 4:19 pm
#123640
If you got an OEM Cluster with a Tach/Rev Counter then Just plug everything in and it will work. All 92-95 Civics (except for delsol) Clusters are plug and play with each other. If you get one from Japan with a tach it will plug into a US Market or a UK Market Civic with no tach.
If you have an Aftermarket Tach/Rec Counter then it sounds like you already found the wires you need, The Tach/Rev Counter should have come with instructions as to where need to go. If you want good Wire Daigrams check out the Haynes Repair Manuals, They are available at every part store in the US, I am sure they are on the other side of the pond as well.
