Civic-EG.com Forum 3.3.1

- Sun May 17, 2009 12:05 am #117327 ok i have a 92 si hacth...it does not have a rear sway bar.dont ask way.i dont kown if it came with 1....i have a rear sway bar off a 91 teg well this work? and were does it bolt to? pics wound help! and if that does not work. what well?

DOWN SINCE DAY ONE!

""America is all about speed.hot,nasty,bad ass speed""

- Sun May 17, 2009 2:13 am #117348 your best bet would be to take one off a eg sedan. they came with rear sway bars ( i believe so ) you can probably modify the integra one but if you want a decent rear sway go get a sedan one from the junkyard.

- Sun May 17, 2009 5:33 am #117362 just 1 person..come on

DOWN SINCE DAY ONE!

""America is all about speed.hot,nasty,bad ass speed""

- Sun May 17, 2009 4:08 pm #117403 the person that replyed is not 100%. The only sedans that have a rear swaybar are the ones with ABS. the DX does not come with one from the factory. same goes for the coupe i believe.

|95 Civic DX|03 Silverado 2500hd|97 Escort LX

- Sun May 17, 2009 7:40 pm #117439 Any sway bar from an integra/civic will work. You wil need LCAs with mounting holes for the end links. if you get a ITR sway bar you will need a reinforment for the subframe. ASR makes a good one.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Tue May 19, 2009 2:11 pm #117715

Any sway bar from an integra/civic will work. You wil need LCAs with mounting holes for the end links. if you get a ITR sway bar you will need a reinforment for the subframe. ASR makes a good one.

x2 on the ASR brace, only the 4-DR USDM EX models came with rear discs, ABS and rear sway bars... i believe they are only 11 or 13mm tho which isn't very impressive

SiLo's 99 EX Sedan build

[Almost R.I.P.]My EJ1 Turbo SOHC Build - 234whp 212wtq

- Wed May 20, 2009 12:37 am #117810 the sway bar for the 90-93 integra will not work. but the control arms will.

i know this for a fact.

Any sway bar from an integra/civic will work. You wil need LCAs with mounting holes for the end links. if you get a ITR sway bar you will need a reinforment for the subframe. ASR makes a good one.

x2 on the ASR brace, only the 4-DR USDM EX models came with rear discs, ABS and rear sway bars... i believe they are only 11 or 13mm tho which isn't very impressive

thats un true.. i had a civic LX-Abs and it had a rear sway bar and rear discs same as the EX.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Wed May 20, 2009 1:35 pm #117854

the sway bar for the 90-93 integra will not work. but the control arms will.

i know this for a fact.

Any sway bar from an integra/civic will work. You wil need LCAs with mounting holes for the end links. if you get a ITR sway bar you will need a reinforment for the subframe. ASR makes a good one.

x2 on the ASR brace, only the 4-DR USDM EX models came with rear discs, ABS and rear sway bars... i believe they are only 11 or 13mm tho which isn't very impressive

thats un true.. i had a civic LX-Abs and it had a rear sway bar and rear discs same as the EX.

oh really? well then, i was under the impression that only the EX's did... you probably had a canadian model?

SiLo's 99 EX Sedan build

[Almost R.I.P.]My EJ1 Turbo SOHC Build - 234whp 212wtq

- Wed May 20, 2009 4:21 pm #117878 sedans with abs got the discs and sway bar.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300