Civic-EG.com Forum 3.3.1

- Wed Apr 01, 2009 2:25 am #107057 i have a B16a2 swap in my eg8 and i wanted to supercharge it but i dont kno where to find one..i need help cus i want to get it asap...any websites r info would be greatly appreciated!

- Wed Apr 01, 2009 4:10 am #107103 JRSC
Vortech
Google.

Shitruiners Inc.

- Wed Apr 01, 2009 1:29 pm #107288 Thanx

- Thu Apr 16, 2009 2:26 am #110916 Go to a junkyard and find a '96 to '97 Toyota Previa and get the supercharger out of them.

I built my setup for less than $600 and had 10psig+ from 1.5k to 6k rpms.

I used the A/C switch on the dash for the master power switch and a micro switch on the the throttle set at around 50% throttle to activate the a/c style clutch on this S/C.

1.4l =84cid > jsrc and I was able to keep my 30mpg+ in town and if I want to accelerate aggressively I turn on switch and floor it and fly by v-8's.

I did a thread on realhomemadeturbo.com but I'll post it up here as soon as I finish building my engine D16z6/y8 w/ vitaras and TT rods.

Should be done next couple of weeks.

[chrono404]

- Thu Apr 16, 2009 3:14 am #110933

Go to a junkyard and find a '96 to '97 Toyota Previa and get the supercharger out of them.

I built my setup for less than $600 and had 10psig+ from 1.5k to 6k rpms.

I used the A/C switch on the dash for the master power switch and a micro switch on the the throttle set at around 50% throttle to activate the a/c style clutch on this S/C.

1.4l =84cid > jsrc and I was able to keep my 30mpg+ in town and if I want to accelerate aggressively I turn on switch and floor it and fly by v-8's.

I did a thread on realhomemadeturbo.com but I'll post it up here as soon as I finish building my engine D16z6/y8 w/ vitaras and TT rods.

Should be done next couple of weeks.

Very Awesome Build, Inspires me to make something similar.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Thu Apr 16, 2009 12:15 pm #110977 Thanks.

I'll be up Wa. for the RHMT Dyno day May 30th in Lynnwood if you want come and check it out.