need so tips on my project

D15, D16, D17 and Mini-Me swaps
 Reply

need so tips on my project

By jdm junior
- Sat Feb 14, 2015 6:18 pm #351888 I wanna build a full a d16z6 swap. with Hbeam rods. Low comp forged pistons for high boost. then get 440cc injectors. Should i get a vtec intake manoifold?? i want it to be set for turbo.which cramshaft should i put? what else i should add? :thumb:
User avatar

Re: need so tips on my project

By teal_dx
- Sun Feb 15, 2015 2:51 am #351893
jdm junior wrote:I wanna build a full a d16z6 swap. with Hbeam rods. Low comp forged pistons for high boost. then get 440cc injectors. Should i get a vtec intake manoifold??


If you have a d16z6, then you already have a vtec intake manifold, although the manifold has nothing to do with vtec- it's just bolted to the z6 head which is a vtec head.

Get ARP head studs for any boosted build. :thumb:
User avatar

By TrailerTrash
- Sun Feb 15, 2015 4:08 pm #351902 i second the ARP studs :thumb:

and dont cheap out on anything. especially engine management and tuning
 Reply
Return to D Series