- Wed Jun 11, 2014 2:28 pm
#346368
These definitely won't fit an EG, but figured I'd post for anyone looking for a set of nice wide 5x114.5 forged wheels.
FS: 18x9.5" SSR D5R. These are a lightweight forged 2-piece welded wheel. Two wheels have very minor scrapes on outer edge of lip where it meets tire (barely noticeable - see pics). Wheels also have some very tiny dimple marks on lip from a shop's alignment machine, also barely noticeable, if you can even see them in pics) Otherwise they're in good shape and the anthracite faces are in great shape too. Comes with metal ssr valve stems. No center caps but you can buy them on SSR's site or there are knockoffs on ebay for cheap. $1400 obo. Local pickup preferred. Located in Spencer OH 44275, about 50 min SW from Cleveland, 1.5 hr N of Columbus. Buyer pays shipping.
Tires are Michelin Pilot Sport. 255/35/18 front (tread is done, dry rotting) and 275/35/18 rear, about 60-70% tread left. Can ship without tires.
Will trade for 18x8 or 18x8.5" 5x114.3 with +35 to +45 offset.
Wheel 1
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/1.jpeg
Wheel 2
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/2.jpeg
Wheel 3
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/3.jpeg
Wheel 4
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/4.jpeg
Back sides
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/back.jpeg
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/label.jpeg
Tread on 275/35/18 tires (fronts are down to wear bars - need replaced)
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/tread.jpeg
They also look good in the back of a truck
high res http://6thgearadvertising.com/sale_web/ssr_d5r/truck.jpeg
test fit on a stock height 06 TSX- realized I'd have to slam to make these look right. Decided to go less aggressive on my daily.
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/test.jpeg
FS: 18x9.5" SSR D5R. These are a lightweight forged 2-piece welded wheel. Two wheels have very minor scrapes on outer edge of lip where it meets tire (barely noticeable - see pics). Wheels also have some very tiny dimple marks on lip from a shop's alignment machine, also barely noticeable, if you can even see them in pics) Otherwise they're in good shape and the anthracite faces are in great shape too. Comes with metal ssr valve stems. No center caps but you can buy them on SSR's site or there are knockoffs on ebay for cheap. $1400 obo. Local pickup preferred. Located in Spencer OH 44275, about 50 min SW from Cleveland, 1.5 hr N of Columbus. Buyer pays shipping.
Tires are Michelin Pilot Sport. 255/35/18 front (tread is done, dry rotting) and 275/35/18 rear, about 60-70% tread left. Can ship without tires.
Will trade for 18x8 or 18x8.5" 5x114.3 with +35 to +45 offset.
Wheel 1
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/1.jpeg
Wheel 2
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/2.jpeg
Wheel 3
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/3.jpeg
Wheel 4
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/4.jpeg
Back sides
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/back.jpeg
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/label.jpeg
Tread on 275/35/18 tires (fronts are down to wear bars - need replaced)
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/tread.jpeg
They also look good in the back of a truck
high res http://6thgearadvertising.com/sale_web/ssr_d5r/truck.jpeg
test fit on a stock height 06 TSX- realized I'd have to slam to make these look right. Decided to go less aggressive on my daily.
high res link http://6thgearadvertising.com/sale_web/ssr_d5r/test.jpeg
Do Not PM me your technical questions. Post them in the forum! 
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
