- Sat Aug 09, 2014 5:43 am
#347763
Car is back and running just having issues with axles right now but I just switched over to innovative mounts
- Mon Aug 18, 2014 1:50 pm
#347955
Yeah, this thread needs some updated day time pics
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Wed Sep 03, 2014 3:07 am
#348437
Installing my new axles tomorrow and just been in and out of town the last 2 weeks.
I looked and looked for center caps over the last years and nothing so I decided to mock something up and then I will go get them made so here is a preview!
how the car is sitting waiting om axles so I can slam it
Car In the garage for now
I looked and looked for center caps over the last years and nothing so I decided to mock something up and then I will go get them made so here is a preview!
how the car is sitting waiting om axles so I can slam it
Car In the garage for now
- Wed Sep 03, 2014 3:24 pm
#348447
nice bay. very clean
- Thu Sep 04, 2014 1:33 am
#348457
Beyond clean! GLWB man
- Mon Sep 22, 2014 6:32 am
#348803
Thanks for the comments fellas.
Car needs a dam throw out bearing.. Every part in this car is new and it started making noise and more I'm having clutch problems so that's next to do.
That's the next project followed by finishing the exhaust.
On the plus side I was messing with the tune and I was able to make a full pass with my afr's not getting too crazy. Car feels under powered but I only slightly touched the ignition tables. Working on finishing the intake manifold with new nitrous hard lines and then I will get the car dyno tuned.
Here is the most current pic enjoy!
Car needs a dam throw out bearing.. Every part in this car is new and it started making noise and more I'm having clutch problems so that's next to do.
That's the next project followed by finishing the exhaust.
On the plus side I was messing with the tune and I was able to make a full pass with my afr's not getting too crazy. Car feels under powered but I only slightly touched the ignition tables. Working on finishing the intake manifold with new nitrous hard lines and then I will get the car dyno tuned.
Here is the most current pic enjoy!
- Sun Nov 09, 2014 4:38 am
#349745
After working 35 days in a row with no sleep and a lot of work hours I get a full week to myself and the car!!
This week I will try to get everything I need to get done.
New throw out bearing this will be my 3rd one wth Confused
Swap intake manifolds
finish nitrous setup
Run electrical for nitrous
and then its time for a tune!!
Pray that it holds together going for a pretty big shot
Enjoy the updates
This week I will try to get everything I need to get done.
New throw out bearing this will be my 3rd one wth Confused
Swap intake manifolds
finish nitrous setup
Run electrical for nitrous
and then its time for a tune!!
Pray that it holds together going for a pretty big shot
Enjoy the updates
- Sun Nov 09, 2014 7:04 pm
#349755
I like where you put your remote battery terminals clean as fuck and not something you see everyday
94 EX coupe (sold 1/2016)
http://civic-eg.com/viewtopic.php?t=27951
93 DX coupe build 2.0 (R.I.P.)
http://civic-eg.com/viewtopic.php?p=331386#331386
http://civic-eg.com/viewtopic.php?t=27951
93 DX coupe build 2.0 (R.I.P.)
http://civic-eg.com/viewtopic.php?p=331386#331386
- Mon Dec 29, 2014 4:51 am
#350620
After working 35 days in a row with no sleep and a lot of work hours I get a full week to myself and the car!!
This week I will try to get everything I need to get done.
New throw out bearing this will be my 3rd one wth
Swap intake manifolds
finish nitrous setup
Run electrical for nitrous
and then its time for a tune!!
Pray that it holds together going for a pretty big shot
Enjoy the updates
This week I will try to get everything I need to get done.
New throw out bearing this will be my 3rd one wth
Swap intake manifolds
finish nitrous setup
Run electrical for nitrous
and then its time for a tune!!
Pray that it holds together going for a pretty big shot
Enjoy the updates
- Page 2 of 3
- 1
- ,
- 2
- ,
- 3