- Thu Aug 28, 2014 4:08 pm
#348354
Installed 1 side last night. Had to do some work around it cause i cut a lil to far Also the paint was coming up around the cuts from the heat of the cutting disk. Sanded it smooth, a thin coat of glaze coat then feather it all out. Last I put a few coats of primer. After it was finished the light fits in perfect.
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage