General tranny info covering all models & motors.
User avatar
By UpgrayeddEJ2
#302133 I picked up an ex tranny the other day. I'm going to get a new clutch and flywheel. Do I get parts by the motor or the transmission?
User avatar
By EG {FIVE-500}
#302157
teal_dx wrote:All 92-00 D-series civics use the same clutch / flywheel :thumb:



i thought all 92-00 d series clutch/flywheels are the same but you get 2 sizes. I say this because i have a 93 eg3 d13 and a 93 eg5 z6. The z6 clutch was shredded so i decided to use the d13 clutch on the z6 but when mateing the d13 pressure plate to the z6 flywheel it only matched 1 of the metal dowel shrubs and the bolt holes was out by 4-5 mm so i had to use d13 flywheel as well :x . so i done some re search and found there is a 200 mm clutch and a 212 mm clutch so i got this table to help me in the future. :thumb:

diameter: 200 mm
number of teeth: 20
pcd: 230

vehicle descripton & year
honda civic 1.3 01/92 - 12/95
honda civic 1.4 04/01 - 10/04
honda civic 1.4 11/00 - 08/05
honda civic 1.4 10/03 -
honda civic 1.5 01/96 -
honda civic 1.6 04/01 - 10/04


diameter: 212 mm
number of teeth: 20
pcd: 238.5

vehicle descripton & year
honda civic 1.5 01/92 - 12/95
honda civic 1.5 01/93 - 12/95
honda civic 1.5 09/00 -
honda civic 1.6 01/92 - 12/95
honda civic 1.6 01/93 - 12/95
honda civic 1.6 08/93 - 12/95
honda civic 1.6 04/01 -
honda civic coupe 1.5 08/93 - 12/95
honda civic coupe 1.6 08/93 - 12/95
honda civic coupe 1.6 01/96 -
honda crx 1.6 06/92 - 12/93
honda crx 1.6 06/92 - 04/98
honda hr-v 1.6 02/99 -
honda hr-v 1.6 04/99 -
honda hr-v 1.6 07/99 -