z6 tranny problem!

General tranny info covering all models & motors.
 Reply

By MnCivicEg
- Wed Mar 21, 2012 12:43 am #299074 My clutch pedal is hard but will my clutch disc have anything to do with it?

By EJ1_MK
- Wed Mar 21, 2012 12:53 am #299075 It could if it is not biting the flywheel like it is suppose to it will not engage your trans. When you press the clutch pedal down it forces the pressure plate to move the clutch disk away from the flywheel and allowing you to change gears. as you release the clutch pedal the clutch grabs back onto the flywheel and allows the car to continue moving.

Here this will help you understand how the trans work this is a d16 trans

http://youtu.be/vzYGcDZXgWQ

And here is the a honda clutch its very vegue but should help you to understand who it all works.

http://youtu.be/grp-virt7vI

By MnCivicEg
- Wed Mar 21, 2012 1:02 am #299077 Okay thanks fors the info. Ill check it out tomorrow and give more info on it.

By MnCivicEg
- Wed Mar 21, 2012 3:59 pm #299145 So i heard that my block is a long block. So will the trans matter or no?

By EJ1_MK
- Wed Mar 21, 2012 4:04 pm #299146 No all d series blocks and trans are interchangable. And the dx trans to an vtec trans all work the same way.

By MnCivicEg
- Wed Mar 21, 2012 4:06 pm #299147 Thanks just making sure about everything.
 Reply
Return to Transmission