Civic-EG.com Forum 3.3.1

- Fri Oct 21, 2011 5:07 pm #278600 So i decided to mill my type r head 0.0196in. (20,000s of an in.) and run a custom cometic head gasket at (22,500s of an in.) which will put me right at 11.5:1 CR. Now my question is is this safe for valve to piston clearance?

Hit me up with any knowledge thanks!

Get In, Sit Down, Shut Up and Hold On!
92 CX Hatch w/Bard LS (SOLD)
95 DX Hatch w/Mini Me (TOTALED)
92 VX Hatch w/B16A (STOLEN)
2000 CIVIC SI B16A (SOLD)

[teal_dx]

- Fri Oct 21, 2011 6:14 pm #278609 please only post the same topic once

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

[chrono404]

- Fri Oct 21, 2011 7:59 pm #278622 The only way to know that is to actually clay your motor before hand.

Heres how:
http://honda-tech.com/showthread.php?t=2966615

2017 Chevy BoltEV DD |2001 Honda CRV SE