DIY - Inline Fuel Filter, Braided Hose and -AN fittings

General engine questions/issues that aren't specific to the other categories
 Reply
User avatar

By teal_dx
- Wed Oct 28, 2009 1:01 pm #153318
ahlee wrote:in another words,stock fuel rail dimension is 12mm or 14mm?since oem is 12mm


I'm not sure what stock size is, as I didn't use a stock fuel rail. You will need to measure your rail to be sure. I read on H-T and some said 12 and some said 14. :?
User avatar

By sparkyej1423
- Sun May 02, 2010 5:51 pm #191465 Ive looked everywhere and cant find a black -5 an tube sleeve and nut
User avatar

By 93hatcheg
- Wed Sep 22, 2010 7:57 pm #214982 hey teal, how do you get the threaded end off the stock rail?? i bought the -6an to 12x1.25 fitting but i cant get the end off the fuel rail to screw in the male fitting. do they make a -6an to 12x1.25 female fitting?

By tonyjdm
- Thu Nov 11, 2010 2:07 pm #222558 Hi, great write up teal_dx, you are very helpful, but i have to ask one thing, i own a EF CRX and the hard line are not like that i suppose you have in the EG
Image

but is like that (pic take from internet)
Image

come out of firewall with no hard lines but with these black "soft" lines...
i have to buy the same things?

ps sorry if i talk bad, im from italy
User avatar

By teal_dx
- Thu Nov 11, 2010 2:15 pm #222559 Looking at the pic,
Image
http://i162.photobucket.com/albums/t252 ... MG0222.jpg

I see the fuel lines on the left. There is herd line on the end of the rubber line going to the filter. You'll just have to cut it off there and use a flare fitting to begin your stainless line from there, then go to your new inline filter and then to your fuel rail :thumb:

By tonyjdm
- Thu Nov 11, 2010 2:48 pm #222561 i will take a pic of my engine bay, yesterday i was checking it and seems to be veeery very short.. uhm
btw thankyou very much :D

By tonyjdm
- Thu Nov 11, 2010 2:50 pm #222562 Image

is not so clean the view, but from here i thinks should be 1 inch... is possible?
User avatar

By teal_dx
- Thu Nov 11, 2010 4:18 pm #222569 Will you be using an inline filter and replacing the OEM fuel filter assembly completely?
The modifications in this thread do exactly that, so you won't have to worry about those short metal lines on top of the fuel filter assembly. :thumb:
User avatar

By whitedxi
- Thu Nov 11, 2010 4:50 pm #222571 Teal can't you make me a set and ship to me? :thumb:

PM me 8)

By tonyjdm
- Thu Nov 11, 2010 4:52 pm #222572
teal_dx wrote:Will you be using an inline filter and replacing the OEM fuel filter assembly completely?
The modifications in this thread do exactly that, so you won't have to worry about those short metal lines on top of the fuel filter assembly. :thumb:


im still buying the same list of thing to do the same modify as you :D


ps. the "H" element on the pic you posted with the summit racing recive has now a different code, and i just cant understand why if your rail has 1/4 you buy a 3/4 ? :eh:
User avatar

By kingjmack
- Wed Dec 08, 2010 11:46 pm #226788 Hey teal, what kind of pressure regulator and gauge are you running on this set up? I already have the line for a stock fuel rail, but I'm getting ready to gat an aem rail and want a regulator and gauge set-up just like yours.


Thanks,
Jeremy
User avatar

By surinamkid
- Fri Dec 17, 2010 3:20 am #228441 if you dont want to purchase the flare kit you can rent it at autozone for free just have to leave a deposit for it. :D
 Reply
Return to Engine - General