Civic-EG.com Forum 3.3.1

- Wed Nov 18, 2009 8:01 am #157092 Okay i just got an intake mani but its pretty dirty. It has oil, and alot of build up on the outside. What can i do to clean it?

"When you turb an NA engine, it is no longer NA"

- Sun Nov 22, 2009 5:48 pm #157826 Sandblast it

[chrono404]

- Sun Nov 22, 2009 5:52 pm #157827 Sand Blasting works, I have used Carb Cleaner and Rags/wirebrushes before to clean up blocks/transmissions.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Mon Nov 23, 2009 12:01 am #157875 oven cleaner

[teal_dx]

- Mon Nov 23, 2009 2:05 am #157898 soak it in simple green and throw it in the dishwasher

Use someone else's dishwasher and don't wash any dishes with it

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Nov 23, 2009 3:21 am #157909 brake cleaner for the inside, it murders it.
simple green or Purple Power it, then use fine steel wool to get the last bit, then prime it, i used self etching primer and it does good, then throw on some high temp aluminum paint

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!