- Fri Jul 25, 2008 5:00 pm
#63369
I cant watch the vid as am at work so I'm guessing you have connected a paper clip or something to the connector near the ECU and put your keys to ignition.
You need to count the number of flashes that come up on the Engine check light, there will be long flashes and short flashes if the codes is a high number and a pause between each code, once it has read out all the codes it will repeat over and over till you take the clip out or turn off your ignition.
Once you have the code number refference them to the list of codes and this should then tell you what is wrong.
If you dont know what the error code refures to post it up on here and someone will be able to tell you, hope this helps sorry its sounds so long winded wanted to make sure I get it all in.