- Thu Aug 02, 2012 7:45 pm
#312605
Prior work before I started it. I have a MSD ignition SCI module, external coil, MSD cap, and MSD wires. I was gonna convert it back to normal but i'm missing the two screws that connect the wires to the coil.
Since I didn't have them I put back the old stuff. Before I put them back in I sanded the inside of the cap and the tip part of the rotor.
So I tried to start my car. It cranks over at a good speed, battery is good. It took like a 1 sec for it to fire but then it won't keep going it would fire up,then die, then fire up, then die.
Unfortunately this is my only car
Since I didn't have them I put back the old stuff. Before I put them back in I sanded the inside of the cap and the tip part of the rotor.
So I tried to start my car. It cranks over at a good speed, battery is good. It took like a 1 sec for it to fire but then it won't keep going it would fire up,then die, then fire up, then die.
Unfortunately this is my only car
![Sad :(](./images/smilies/frown.gif)
94' civic si
JDM B16A w/AC
My daily driver: http://tiny.cc/3bdut
K3 GSXR 1000: http://tinyurl.com/3u6obdx
![Image](http://img830.imageshack.us/img830/3046/happyface.th.jpg)
JDM B16A w/AC
My daily driver: http://tiny.cc/3bdut
K3 GSXR 1000: http://tinyurl.com/3u6obdx
![Image](http://img830.imageshack.us/img830/3046/happyface.th.jpg)