General engine questions/issues that aren't specific to the other categories
User avatar
By bren94cx
#106799 im come to realize that my engine (d15b8) is quite the odd ball
no one makes parts
no one mods it
no one boosts it

i had problems with hooking my catback to it

:thumbdown:

i want to swap it this coming weekend and im gonna hit up a bunch of junkyards

ive read that all i need is the engine tranny axles etc..
im kinda hesitant to swap though cuz ive had so many problems with this car so far...

will i run into more problems just because its a cx body/frame?
are all the sub models ( dx, lx, cx) the same? engine bay, frame wise?

what about motor mounts? will everything be as easy as it seems?
this is my only car... so i wanna bang it out as quick as i can so i can drive it to work on monday and not worry about it...

any advise would be great!!!
User avatar
By Sentry
#106805 Mechanically, any D series can be straight swapped for any D series. No need for a new tranny or axles.

If you are going to a VTEC engine you'll need an ECU and you'll have to do some wiring.
User avatar
By Faded_Milano
#106807 You'll need an ECU for whatever engine. If you get a engine with VTEC, you'll have to wire in VTEC. If you get a B series, you'll need B series mounts, which you can get out of an integra. You'll need axles if it's a B. You will also need a B shift linkage if you get one. I think that just about covers it.
User avatar
By Sentry
#106809 What he said. :thumb:
User avatar
By suspendedHatch
#106905 It's an odd-ball because it's an 8 valve engine with 60 hp.
User avatar
By Gorveatt
#106906
suspendedHatch wrote:It's an odd-ball because it's an 8 valve engine with 60 hp.


BINGO! i wouldn't even Mini-Me one of them.
User avatar
By bren94cx
#107087
suspendedHatch wrote:It's an odd-ball because it's an 8 valve engine with 60 hp.


its a "fail" of an engine lol
User avatar
By Faded_Milano
#107107 It has more torque than Horsepower :lol:
By coseglia
#108220 WHY DO YOU NEED NEW AXELS. DOES A INTEGRA HAVE A B SERIES?
User avatar
By ohDirka
#108231
bren94cx wrote:
suspendedHatch wrote:It's an odd-ball because it's an 8 valve engine with 60 hp.


its a "fail" of an engine lol


It was designed to be an economy car...
User avatar
By 92egdxhatch
#110433
suspendedHatch wrote:It's an odd-ball because it's an 8 valve engine with 60 hp.


i dont know much about this but couldnt u just take a d15b7 head and put it on the b8 to make it a 16 valve?
User avatar
By bren94cx
#110492 dont matter any more
pulled it out swapped with d16
By Matt.M
#110702 I have the same engine in my car, and I plan on using it until it blows just because it gets me 40-45 MPG, and I drive A LOT for work, sometimes 1-1.5 thousand miles to get to my location.

I am pretty annoyed that I can't find parts for it though. I'd love to do a few smaller mods to it so I can climb hills without having to drop it to 4th gear on the interstate :eh: