My eg

New members NEED to read the following:
'Rules & Guidelines' 'Using the Search Feature' 'Where should I post my Topic?' before posting on this forum!
 Reply

My eg

By SikEG
- Fri Aug 28, 2009 10:04 pm #140331 Hey everyone im a newbie here with a JDM passion i have a eg with a gsr dashboard swap and i have a question. What door pannels do i use to fit the stock ones dont fit do i have to fab them or is there a lttle sec
ret ?
User avatar

By Vti93T
- Fri Aug 28, 2009 10:06 pm #140333 Welcome..I'm pretty sure there was another person on here that swapped an integra dash in and I think you have to do some cutting to the dash to make it fit or something. Do a search on here and it might help ya out a little more
User avatar

By chrono404
- Fri Aug 28, 2009 10:11 pm #140334 If you use a heat gun and heat up the front of the panals then slam the door it will mold to accept the new dash. Or so I have read.

You can try fabbing Integra door panels onto the EG Doors. There will be more fabricating but that's what comes with custom parts.

Out of Curiosity why do you have a Integra Dashboard in your EG if you have a "JDM Passion? Did the car come that way?

Pics?
User avatar

By Punksz6
- Sat Aug 29, 2009 2:47 pm #140398 Welcome.. :)
User avatar

By Dippin_EG
- Sat Aug 29, 2009 4:14 pm #140408 welcome to the site :thumb:

post some pics in the your ride section.
User avatar

By Chance
- Mon Aug 31, 2009 2:30 am #140627 :welcome:
 Reply
Return to Newbies Read This FIRST