Civic-EG.com Forum 3.3.1

- Mon Apr 05, 2010 3:58 pm #185681 hi i got a civic esi d16z6 eg hatch.
im swapping it to a b18c4, how much of this engine is just bolt in?
like the driveshafts fit the eg hubs? and the mounts fitting existing points and gearlinkages etc
the parts im taking off is from a civic vti 2000 or mb6

any help and advice is appreciated thanks

- Mon Apr 05, 2010 4:38 pm #185685 Im doing the same swap,

You can use the 2 side mounts's from the D-serie but you need a B-serie rear engine mount! (eg vti hatch wil do)
You also need the gearlinkages from a EG VTI HATCH
Your PS wil nog mount on the B you wil need to figur out with bracket/pomp you need.

Axle's wil fit, but i recommend a brake swap to 262 with booster and HRC.

Are you ging to run on OBD1 or 2?

[teal_dx]

- Mon Apr 05, 2010 6:34 pm #185713 http://www.civic-eg.com/viewtopic.php?t=911

that link may be helpful

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Tue Apr 06, 2010 7:18 pm #185896 hey cool thanks bud.
my friends wrecked a mb6 vti so im buying off him soon. at least this way all the parts are there to go, engine stills runs good and most parts still work.
im hoping to swap as much as i can brakes as well. so maybe obd2 im thinking
thanks for the help good luck in your project